Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Antique pump

Posts

Antique pump

#1

Antique pump

Ellis Walentine, Host

>Spring housecleaning is such fun. Today I found what appears to be an old well pump, hiding in a dark recess of our basement. It has a 1/6 hp motor which I have not tried, but the piston moves freely, so I expect it works. Do these things have any value other than their quaintness? If not, it's heading to the scrap yard with all the rest of the junk I'm getting rid of.

Ellis





Re: Antique pump

#2

Re: Antique pump

Rob Stokes in North Vancouver

>Donno about value, but I do know that if that was in my basement and I could get it working, it would become the "garden" pump, extracting "free" water out of my rain barrels. Couple it with a pressure tank and you could quite easily build your own "off the water grid" system to support all exterior water use (gardens, car washing, back yard waterfall etc.)

That thing's so cool looking I seriously doubt I could let it go!

Rob

Re: Antique pump

#3

I'll send you my address

Mark Goodall - ATL - tooljunkie

>I've bought all sorts of old cast iron things like that to decorate our house.

A little cleaning, maybe a little bit of paint, perhaps removing some of the less attrative pipe. It would make an elegant conversation piece in a living room, foyer or sunroom.

Please don't scrap it. Please, please, please.

Either,

1 - clean it up and use it, either to pump water outside, or as a dry conversation piece in the house

2 - take a couple of pictures and sell it on eBay

3 - ship it to me and I'll pay the shipping and make a donation to WC

But whatever you do... don't scrap it.

Happy Woodworking!

Re: Antique pump

#4

Love those old electric motors

Bill Houghton, Sebastopol, CA

>Motor the size of a Honda Civic engine (well, a little smaller), generating all of 1/6 HP...

I hope it finds a happy home - sounds like you've got at least one offer - but I'm sure you'll appreciate the space, too.

Re: Antique pump

#5

Clean'er Up Hook'er Up

Mark Mandell - Gone Round In Jersey

>With a slick powder-coat paint job and proper GFCI circuitry, then mate to the barrel-stave construction hot tub on the deck!

Tapocketapocketapocketapocketa

Put you to sleep in no time.

[What? No hot tub? Get crackin'! The season's here!]

Re: Antique pump

#6

Re: Antique pump

Bill Tindall, E.TN

>I remember one of these in the basement of my grandparents home. It would make a great irrigation pump for a small garden.

Re: Antique pump

#7

Don't trash it

Ken Garlock, Collin County Texas

>Look around your part of the world and find an old tractor club. They can most likely direct you to an up-coming old engine show. People buy, sell, trade old pumps that these get-togethers. If you like anything mechanical, you can have a fun day looking at the antique engines that will be running.

Don't do anything more that a good wash down with simple green. Let the buyer do the restoration work.

It sounds like a good summer Sunday afternoon outing.

Ken

Re: Antique pump

#8

Re: Clean'er Up Hook'er Up

Bob Lemon, Sacramento CA

>I remember operating one of those pumps but they had double acting steam engines on them. Very noisy! You want to fully restore and put it in a museum such as this....


img

Re: Antique pump

#9

Don't

Mark Mandell - Gone Round In Jersey

>Look like no hot tub to me. Towocketapocketa, maybe, but no tub worth soakin' in.

|;-}

Re: Antique pump

#10

Shallow Well Pump

Robert R. Clough - Thorncraft

>Looks like a shallow well pump. 25 - 35/40 ft maximum depth. Back in the 1960s our landlord and I used one of these as the main source of water for two houses. The well was 25 ft deep with the well head coming to within 1 ft of the top - and that was down from artesian (sp) surface a few years before. It worked well The pipes were buried at 6ft and we used a chain excavator. The main pipe was only a 1 inch pipe but it did serve two houses very well even though the length was at least 100 ft.

Re: Antique pump

#11

Sears and Craftsman would...

Joe Pack

>Considering the size of this sucker (no pun intended), Sears Craftsman would rate a motor that size at somewhere just over a jillion horsepower (peak, of course). Just think what a shop vac Craftsman could produce with this monster!

Re: Antique pump

#12

Yes, actually it is

Ellis Walentine, Host

>We live in an old house with a dug well that is about 35 feet deep, with about 20 ft of water in the bottom. It served the house until about 50 years ago. I suppose I could reunite the old pump with the old well and use it for gardening, as I don't trust it for drinking.

Thanks for the background.

Ellis

Re: Antique pump

#13

Re: Yes, actually it is

Glenn Madsen near San Francisco

>Here, that would be appreciated by the water district.

Unlike you Easterners, who seldom know drought, lack of a water supply can be a serious problem for gardeners in California. More so in other Western states.

They were grumbling pretty seriously here up until the beginning of the month, when we got a bunch of precipitation.

Re: Antique pump

#14

Throwing away an Antique pump!

Bricofleur

>Nice antique pump you got there. You could give it to a museum instead of the scrap yard.

I suggest you cap it with a WoodCentral hat and say you went on a trip to Indonesia! Oops, the pavement... you made a trip in Tuscany!

Best,

Serge

Re: Antique pump

#15

Re: Yes, actually it is

Bill White

>C'mon Ellis. You know that you need a summer project. All that free time is killin' ya.

Bill

Re: Antique pump

#16

Um, ...

Ellis Walentine, Host

>... thanks to all my pals here, the pump is safely in my shop, where it will stay until I get a chance to fix'er up and decide on its next reincarnation. I hope I don't trip over it too many times in the meantime.

Ellis

Re: Antique pump

#17

Re: Yeah !!!

Bricofleur

>Congrats, and.... thank you!

Best,

Serge

www.atelierdubricoleur.spaces.live.com

Re: Antique pump

#18

Ellis,

Bill Houghton, Sebastopol, CA

>Don't give in too easily to the urge to move it on to a good new home. I'm slooooowly learning that I need to set my priorities, and giving up things I held onto for years.

While I enjoyed the heck out of my 1949 Studebaker pickup years ago, I finally decided that hours of crawling under it to get it safely roadable again just weren't important enough, and gave it to my son (who promises to let me drive it when he's got it ready, so I'm not entirely giving it up).

Focused instead on our house and, when I can get there, the woodworking shop; and maybe, in a year or so, taking up playing an instrument again, all of which promise more fun with less pain.

Of course, if I stumble over a late Studebaker Hawk or a Lloyd sedan for $50, I reserve the right to change my mind and get auto-greasy again...

Re: Antique pump

#19

Said that opening sentence wrong

Bill Houghton, Sebastopol, CA

>What I meant to say was that you shouldn't let this group's protestations over getting rid of a fine old pump overwhelm your judgment: if letting it go to someone else (pump fanatic, museum, scrabbling back to the lander who needs a pump) makes sense, go for it.