OT Honda Brake Pads
Sawman
>I have a '99 Accord and when I redo the brakes I have been going to the dealer for the front pads. Anyone have a similar car and what pads do you use that are more economical?Thanks
Knowledge You Can Build On — Est. 1998
OT Honda Brake Pads
Sawman
>I have a '99 Accord and when I redo the brakes I have been going to the dealer for the front pads. Anyone have a similar car and what pads do you use that are more economical?Thanks
Re: OT Honda Brake Pads
Jim Shaver - Oakville, Ont
>Hi,
My father always said the most important part of a car are the quality and condition of your tires, followed by well serviced and quality brakes...I always went with Original Honda parts, my 96 Accord is up for sale now, just bought a 2009 Accord... the reliability of the original parts also is peace of mind, a small price to pay.
take care,
Jim
Re: OT Honda Brake Pads
Tony - Memphis
>I have a buddy (my old boss) who is a brake engineer at Delphi. He has always recommended OEM brake pads. His reasoning is that they put a lot of resource into specifying pad materials based on that particular car and its setup. He says that folks that offer these crazy warranties on brake pads are selling pads that are very harsh. I was looking into aftermarket pads for our Z, but after lots of research, I went to Nissan and bought them. All the aftermarket pads offered some sort of compromise that I wasn't willing to make. The reason I was looking was because the front pads make the rims look terrible two days after you wash them. But they stop good and are very quiet. On the other hand, I bought Napa's best for our old Sebring Convertible and for my last truck and had good luck with those. Not sure they were really very "cheap," but my company gets a discount there.
Tony
Re: OT Honda Brake Pads *LINK*
mark nowicki
>I have a 2002 Honda Accord with 320565 kilometers on the odometer. I have found that my dealer has the best prices for parts.
I have been using this site as my pricing reference.
Regards
Mark
Honda parts
Re: OT Honda Brake Pads *LINK*
mark nowicki
>Here is another link
More Honda parts
Best pads are from the dealer
Mark Goodall - ATL - tooljunkie
>When I got my first car (a $150 Honda Civic) my Dad taught me to always put my money into good tires and good brakes. While my friends had tricked out cars with killer sound systems, I had Michelin tires worth more than the car itself.
That car is long gone, but over the years learned that dealer OEM brakes pads are the best solution long term. I've made the mistake a couple of time by putting on less-expensive pads on a few cars and without exception it lead to expensive rotor resurfacing and/or replacements. Every time.
I learned that lesson long ago, but a year or so ago my wife took our 6 year old Honda van to get the brake pads replaced. The brake system was perfect at that point, but the pads had worn down and needed to be replaced. I didn't realize it till later, but she took the van to the local Midas/Goodyear/whatever to have it done, which they did for a couple of hundred dollars. Within 6 months we started to have brake-pulsing vibration (warped disks) and over the next 6 months we had them replace the pads again, resurface the disk(rotors) a couple of times and it just got worse. It was horrible.
Infuriated, I told my wife to go to the Honda dealer and have them redo it properly. Over a thousand dolalrs later, the brakes were perfect again. They had to replaced the rotors as well as the pads. A costly mistake.
As much as I hate dealers and their ridiculously high prices, when it comes to brakes they have proven to be the less costly solution in the long term.
I worked as a mechanic to pay my way through college, and the owner taught me never to skimp on brakepads, tires or oil.
Happy Woodworking!
Honda Brake Pads only!
Ralph in Huntington Beach
>I've never had a problem with after marked brake pads on any vehicle I've owned, EXCEPT with our 89 Honda Accord! After I replaced the pads with something I got from a parts store, we started having problems...the rotors started to warp, big time. We were lucky to find a Honda only mechanic who really knew Honda's. I don't remember if we had to replace the rotors or not but he fixed the problem and told me very clearly...NEVER, EVER PUT ANYTHING OTHER THAN HONDA PADS ON A HONDA!!! He didn't yell at us of course, but did make it very clear how important it was. Many times since then, I've talked to other Honda owners that have gone through what we went through and have heard many different stories, from, "I'll never buy a Honda again" to "I just thought Honda's brakes weren't very good" to "I always take it to the dealer now".
I don't think that after market pads are unsafe or anything like that, but when it comes to a Honda, go with Honda brake pads only.
Couldn't agree with you more...
Mark Goodall - ATL - tooljunkie
>Both with you and your Dad. My Dad told me EXACTLY the same thing.
Happy Woodworking!
Toyota too
Mark Goodall - ATL - tooljunkie
>I've owned mostly Toyotas and Hondas over the years and both seem to be senstitive to non-OEM brake pads up front..... Warped disks that would make Frito-Lay jealous.
I always thought it had something to do with metallic content and higher quality in the more epensive OEM pads.
Happy Woodworking!
Agree with everyone
Ellis Walentine, Host
>I guess by now you have enough unanimous advice to make your decision, but in case you still feel like skimping on pads, my experience with non-Honda pads (I think I've owned nine Hondas in the past 30 years)is that they squeal annoyingly and wear faster than OEM pads.
Ellis Walentine, Host
Re: Toyota too
Ralph in Huntington Beach
>I just sold my 95 T100 and got a new Tacoma. I know that my mechanics always said use Toyota parts and you'll have less problems and that they did indeed use Toyota brake pads, but I never really thought that they would have the same issue as the Honda's!
Thanks for the heads up!
Re: OT Honda Brake Pads
Carol - now back in Dubuque, IA
>Just had the brakes done on my Odyssey. Honda did the job. No problems and they were less than the tire/brake guy advertising on the highway billboard.
FWIW, I have worked with two Honda dealers, one here in Iowa and the other in Arizona where I bought the car. Both of them have been very competitive with pricing, not pushy in trying to up-sell, and provide free shuttle service. That means oil changes as well. They have been a little cheaper than the quickly lube places. Obviously they want me to buy another Honda when I need a new car. So far, I am incline to, simply because the service has been outstanding in two different states.
I must disagree....
Chuck W
>I have had very good luck with aftermarket jobber brake pads at a much lower cost than original parts. I mean a brake pad is a brake pad and if you look closely at the dealer pads they are likely made in the same factory as the aftermarket. I bought some "ceramic" pads that gave very good service. at least equivalent to original. my 2 cents.
Re: I must disagree....
Ralph in Huntington Beach
>Are you talking about Honda in particular or aftermarket pads for any car?
"I have had very good luck with aftermarket jobber brake pads at a much lower cost than original parts. I mean a brake pad is a brake pad and if you look closely at the dealer pads they are likely made in the same factory as the aftermarket. I bought some "ceramic" pads that gave very good service. at least equivalent to original. my 2 cents."
Re: I must disagree....
Chuck W
>I am talking about all cars in general and about honda in particular because i own one.
All the same?
Mark Goodall - ATL - tooljunkie
>"...I mean a brake pad is a brake pad and if you look closely at the dealer pads they are likely made in the same factory as the aftermarket."
The car I took my driver's education in was a Chevette. My best friend's Dad drove a Cadillac. His uncle drove a Corvette. They sure didn't seem the same to me.
And to keep this wood related..... the wood they make Walmart furniture sure doesn't seem to be the same as the wood I've seen in other furniture.
I'm not sure all brake pads.... or all anything... are the same.
Happy Woodworking!