Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Painting over Polyutherene

Posts

Painting over Polyutherene

#1

Painting over Polyutherene

Ed O'Neill

>Many years ago I built a secretary for my wife which had been handed down to our daughter. Recently we got it back and my wife wants me to paint it black ??? Right now its dark walnut minwax stain covered with poly. The finish is about 25 years old. My question is what do I have to do to prepare it for paint ?? The finish she wants is flat black with the edges in spots distressed to give it that country look. Help, I'm not a painted furniture guy so I'm really stumped. Thanks for any advice you can give me . Ed

Re: Painting over Polyutherene

#2

Re: Painting over Polyutherene

Mark Mandell - Gone Round In Jersey

>Wipe it down with some naptha to take off any wax/polish/use-oil off. Then rub it down with some 400 grit paper, vacuum/blow off well, and paint away. This is assuming the poly film is still sound and tight on the wood. If you've got any flaking or whitish spots, they'll need to be sanded to beare wood, then resealed.

Think you may have some challenges in distressing the edges yet still keeping some finish on them. Krylon makes a pretty good flat black lacquer. Using lacquer you can rub off the edges with lacquer thinner rather than abrasives. Just a thought.

Re: Painting over Polyutherene

#3

Can't talk . . .

steve mackay

>her out of the paint ? I can feel the pain from here !

Re: Painting over Polyutherene

#4

None Of My Daughters Wouldn't Dare Ask!

George@Colonel's Workshop

>

Re: Painting over Polyutherene

#5

Nooooooooooooooooooooo......

Mark Goodall - ATL - tooljunkie

>Paint is what they slap on that recycled garbage sawdust furniture they sell at Walmart.

Tell her that unfortunately the glossy poly finish that the wood currently has won't let any other paint adhere to it. If she doesn't believe you tell her to ask anyone of us here :)

Happy Woodworking!

Re: Painting over Polyutherene

#6

I say do it

John in MD

>My wife had her childhood desk, which her Mom said they got used in the early 60's. When my daughter was getting to be big enough to need a desk, I stripped off the white paint (and the yellow paint under that, and the black paint under that...) and found a beutiful solid cherry, child-sized roll top desk under all that paint. Also a makers mark that as far as I've been able to find out puts the desk at being made sometime in the 40's...

So, I say go ahead and paint it. Maybe put on a couple of layers. Then, when your great-great grand son, 60 years from now, strips that secretary that's "been in the family forever", he'll just scratch his head about why someone would paint over such a beautiful piece...

-John-

Re: Painting over Polyutherene

#7

Not his daughter, Colonel.

Gary Evans Tallassee, TN

>His wife wants it painted which means she's probably not asking, she's telling! 8^]

Gary

Re: Painting over Polyutherene

#8

Re: Painting over Polyutherene

mark nowicki

>Currently, I am painting over our oak kitchen cabinets. Both of us got tired of looking at that depressing wood grain and wanted some color in our lives.

Sand with 80/120 just to rough up the surface, Zinsser 123 primer/sealer/ all surface bond coat (blue can), 100 acrylic top coat.

I love paint!

Mark

Re: Painting over Polyutherene

#9

Re: Painting over Polyutherene

Howard Acheson

>Clean it up as suggested but I would recommend using a more aggressive sand paper. Use something like 150 grit. Polyurethane that old is going to be very hard. Poly also provides a very poor substrate for any finish as it provides poor adhesion. Aggressive scuff sanding is required. Then I would suggest priming with a shellac primer like Zinsser 123. You can tint it black to get a head start on the color. The shellac primer sticks well to the scuffed poly and will provide a good base for your paint.

Proper preparation is important or you may find that the item will chip fairly easily.