Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Powermatic Customer Service

Posts

Powermatic Customer Service

#1

Powermatic Customer Service

Thomas Skaggs, Foothills of Mount Level

>I recently took delivery on two new "big iron" deliveries to my shop. One was the new Powermatic 1800 bandsaw. During start-up a fluke occurred with my power supply causing some damage to the starter/ switch system. I called Powermatic (WMH Tool Group) and got lot's of excellent phone assistance. Powermatic then followed up by rushing me new parts. Once I had the parts I ran into some difficulties making the repairs. I called Powermatic and they arranged for their nearest authorized repair place to send a person to my shop to make an on-site repair. The nearest place was 2 hours away. The guy showed up on a SUNDAY and completed the repair. The saw is up and running perfectly.

The other machine came 2 weeks later. It is a large oscillating edge sander. It appears that in shipping a cast iron part got knocked and cracked. Once again I called Powermatic and 3 days later the replacement part was on my doorstep.

No hassles, no charges and always an offer to provide aditional assistance if needed.

No affiliation here. But in this era of diminishing service I just wanted to shout out some kudos to Powermatic for such excellent customer service.

Tom

Re: Powermatic Customer Service

#2

Re: Powermatic Customer Service

George@Colonel's Workshop

>Good Afternoon Tommy,

Nice to know their service is good as gold, as are their tools. I'd expect nothing less.

George

Re: Powermatic Customer Service

#3

I wish my recent pellet stove experience

Gary Camp, Bend, oregon

>Had been so good. The only way to contact the factory is through an e-mail system. Their response was to contact my local dealer, 25-30 miles away with a service department that to put it mildly s... well it is way less than adequate. I explained the I wouldn't deal with the "local" guy, and could I please have the factory phone number. Same response. I guess I have to do some research and find the presidents name and send him or her an e-mail. In my professional world I deal with factory techs all the time. Hobart is probablly the worst. If you are not a factory authorized tech "no talkie to you" It matters not the the "local" factory tech is 165 miles away and shows up on his schedule and charges travel both ways plus plus plus charges. Other companies like Frymaster wow, how can I help you. What a difference

glc

Re: Powermatic Customer Service

#4

Good to hear

Tony - Memphis

>Seems like nothing you buy just wokrs fine these days. Seems like everything we buy has an issue. Glad to hear PM is good since I just got a PM2000 last August. Fortunately, I haven't needed to call them! Which is wonerful! Love the saw too. Congrats on the new toys.

I had a Delta CS before. I was cutting tenons the other night and it occurred to me how much I liked this new saw over the old one. Not sure it was worth the money, but I sure like it. Very solid.

Tony

Re: Powermatic Customer Service

#5

Re: Powermatic Customer Service

Dan Mitchell

>I have a PM2000 & one of their 8" jointers. So far, I haven't had any difficulties, but it sure is nice to hear that they stand behind their products. Service is one of the main reasons for spending the extra $$$. Thanks for passing on your experiences & enjoy the new toys!

Dan

Re: Powermatic Customer Service

#6

Re: Powermatic Customer Service

Nick Tuzzolino

>Had minor problems with my 3520 lathe. They bent over backwards to help me out.

Re: Powermatic Customer Service

#7

Re: Powermatic Customer Service

Fred Davis

>After getting the second PM66 about eight years ago and the PM 719A Mortiser two years later, if I were setting up a new shop, in the big iron class I have come to the conclusion that if PM doesn't make it , I would do without .

Of course I had to buy this Delta DJ-20 before I thought that one out.

FredD

Re: Powermatic Customer Service

#8

Re: Powermatic Customer Service

Dan Mitchell

>Fred-So you're saying you don't like the DJ-20?

Re: Powermatic Customer Service

#9

Re Customer Service feedback

North of the Border

>Happy to hear about your good customer service experience. If you haven't done so, please do share your feedback with the companies that you received your service. Why? Positive feedback (we all found that out when we were kids at home and at school or as adults at our work place)encourages positive behaviors. Lee Valley staff (there're exceptions of course) tend to be more positive and helpful because (among other things, like corporate culture and the management's insistence on customers first as reflected in their sales and returns policies)most customers who shop there give their feedback verbally to the store all the time. They have a lot of UNPAID and volunteer brandname ambassadors! If someone makes our day with their service, we should do the same to them by telling their managers how well they did. Come to think of it, why do most people tip their servers generously even when the food or service is just average but seldom do anything when they have a wonderful sales experience at a retail store?

Re: Powermatic Customer Service

#10

Re: Powermatic Customer Service

Fred Davis

>Dan, last January, the table went out of adjustment and the when I discovered the manual was short several , pages and got that corrected , it became clear to me that a Mill wright experienced with that all of the eccentrics in that machine would need to adjust it.

I am no slouch at adjusting and maintaining machines, but this one had dropped down on the front right corner of the infeed table again , same deal as first time , the eccentric moved.

Before you say it is a piece of cake to adjust you better read the complete manual, think nightmare, it took the mechanic 1 1/2 hours to adjust the first time.

When it is up to specs , nothing could be finer , but I ain't in Carolina.

Kansas , one Millwright in whole state that is familiar with the problem .

FredD

Re: Powermatic Customer Service

#11

Re: Powermatic Customer Service

Dan Mitchell

>That's interesting. I had a 6" Delta "Professional" jointer about a decade ago, which came with a warped fence. Delta replaced the part - with one that was WARPED MORE. Permanently put me off the brand.