Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Bank Truck Fleet

Posts

Bank Truck Fleet

#1

Bank Truck Fleet

George@Colonel's Workshop

>Good Evening Friends,

For the past few days I've been finishing up the fleet of bank trucks built primarily for my grandkids, with some going to families rather than individuals. It gave me good excuse to use up hardwood scraps of mahogany, maple, cherry, walnut, red oak, poplar, and aromatic red cedar.

It was a surprise and delight to find out my skills were adequately challanged, and the job required use of nearly every tool in the shop. The body was held to about 3/8" thickness. The inspiration was a feature in Shopsmith #41, circa 1985. This was a fun project and well worth my time. The grandkids who received the toy this evening loved them, and I hope they will be retained a long time. I even built one for myself, and have it filled with about 25 pounds of saved coins. The finish used was multiple coats of "tung oil" in the yellow can.

George


img

Re: Bank Truck Fleet

#2

A Single Example

George@Colonel's Workshop

>Good Evening Friends,

I bought the wheels and axel pegs from Lee Valley. The engine is red cedar, bumpers are poplar, Wheels are birch. The cab and chasis are cherry, gas tanks are cedar, coin compartments are mahogany, and the top of all the trucks is made from red oak. Fenders are of black walnut. Not shown are the maple panels for the rear of the truck, which provide nice contrast.

I hope the grandkids develop an "interest" in saving. :<)

George


img

Re: Bank Truck Fleet

#3

Re: A Single Example

mdclor

>George,

These trucks probably have more value than some of the banks on the Dow! Don't know if I am laughing or crying. Nonetheless, they look great and I will save the pics for reference.

Merle

Re: Bank Truck Fleet

#4

Re: Bank Truck Fleet

Clint Searl, at the base of Haycock Mtn

>Thanks for the smile, George. They'll make the recipients happy.

Clint

Re: Bank Truck Fleet

#5

An idea for you

Dan Donaldson

>Those are really neat banks. Something that just hit me as I was looking at them would be to make one with one of those antique post office box doors (glass window and combination lock)for the back.

Re: Bank Truck Fleet

#6

Re: A Single Example

Fred Davis

>Evening George,

My wife Elaine and her first husband made many wood toys and puzzles and she said.............you did good.

FredD

Re: Bank Truck Fleet

#7

Re: Bank Truck Fleet

Dennis E Peacock

>Looks really good their Colonel.!!! I bet they'll treasure those for a lifetime.

Dennis

Re: Bank Truck Fleet

#8

JL

How do you put the money in?

JL

>You mentioned pounds of coins.

Re: Bank Truck Fleet

#9

Outstanding !

Don Orr

>

Re: Bank Truck Fleet

#10

Re: A Single Example

Jim Shaver - Oakville, Ont

>All Beauties George,

I know the wood you choose will not shrink as much as the US market has, any ideas on how to stabilize the US banks? Quarter Sawn deposits?

Take care,

Jim

Re: Bank Truck Fleet

#11

Hardwoods . . .

steve mackay

>You had your job "cut out" for you with those ! I tend to shy away from harder woods for miniature. One "whoops" and I get saw dust. I really like the sampling of woods. Very nice. One question though . . .

Have you had the ENTIRE fleet "tested" for evil content ?

( Sorry, couldn't resist ! )

Re: Bank Truck Fleet

#13

Putting the Money In

George@Colonel's Workshop

>Good Afternoon JL,

I put a coin slot in eaCH oak top. I butted the tops up against my 8 1/2" SCMS @ 90 degrees and plunged through the center of each. Alternatively, I could have raised the table saw blade thru the tops. Coin removal requiires removal of a single phillips head screw from the bottom of the chasis, releasing a slat captured by a dado in the chasis, and attached to the rear truck bumper. Unscrew the phillips, pull out the bumper and coins of the realm cascade all over the floor.

George

Re: Bank Truck Fleet

#14

But do they stop on a dime?

Joanne in Pt. Pleasant, PA

>These are wonderful--you can bank on it! I love the wood combinations. I made a little wooden dump truck for my friend's grandson a few years ago, but it was not quite so fancy. The bumpers and fenders are great. Thanks for posting these.

Re: Bank Truck Fleet

#15

Bank Truck Fleet needs roads

Lee Schierer - McKean, PA

>Great job George, now you need to build them road building equipment so the bank trucks have somewhere to drive.






Isn't it amazing how a simple toy challenges the shop skills.

Lee

Re: Bank Truck Fleet

#16

Now, They Are Really Neat

George@Colonel's Workshop

>Good Afternoon Lee,

Those pieces of heavy maintenance equipment are prefect for little grandsons, their fathers, and grandfathers. Where did the plans come from. I've still got some scrap left over.

George