Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Current project

Posts

Current project

#1

Current project

Clint Searl, at the base of Haycock Mtn

>For the past couple months, I've been working on an eight drawer dresser for a closet built-in, and finally got to the point of setup and dry fit. The carcase unit is a pair of ply boxes edge faced with solid pine. The drawer boxes are maple and outsourced, with faces made of an ecologically correct gimmick material called Kirei Board that has no structural value, but costs a lot if you can find it. The next step is to make up a floating top with a natural edge that will span the full interior of the closet. Then it will be plumb and level and permanently install.

Comments welcome

Clint


img

Re: Current project

#2

Re: Current project

Bricofleur

>Nice work Clint. At the first glance I thought is was spalted wood. It caught my eyes right away. I like the "figured" look of it.

Thanks for sharing.

Best,

Serge

Re: Current project

#3

Unusual as usual

Ellis Walentine, Host

>Clint, I love the surface decoration properties of that board. Inquiring minds might want to know how much per square foot and where to order it. And where do you outsource your drawer boxes. I'm attempting to redo my kitchen soon and that is an issue for me.

Nice work.

Ellis

Re: Current project

#4

Re: Unusual as usual

Clint Searl, at the base of Haycock Mtn

>Ellis, here's the "rest of the story." I saw Kirei Board at the Environmental Home Store, in Doylestown, where they had samples and a vanity cloaked with the stuff. It fit the look I was seeking, so I requested a quote for a 3'x6'x20mm sheet. The base price was around $12/sf, but with shipping turned out to be $24/sf. I declined their offer and shot a friendly email to the manufacturer. Long story short, their sales guy made arrangements to get the shipping to $29, so I accepted it.

It's made of plant material that's compressed and stuck together with nontoxic goo. It's light weight and easy to cut with a 40 tooth blade, but cannot be shaped. Edges must be banded to retain any integrity. Any tough clear finish can be applied to produce a durable nice surface. I happened to use a one part water borne epoxy. I got the look I was after, but probably won't use it again.

The drawers came from ccfdrawers.com. Any size, any material, fast response, quick delivery, knock down or assembled, reasonable price. I couldn't be happier.

Gimme a holler if you want to check out either product.

Clint