Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Help with hardware

Posts

Help with hardware

#1

Help with hardware

lee beeden

>A friend has asked me to build a sewing table on casters.

She would also like to have the machine raise and lower into the table top on some kind of lift.

Any suggestions as to where i can purchase such hardware and what it is called?

Thanking you in advance

Lee

Re: Help with hardware

#2

Re: Rockler.com--sewing machine lift

Dave Anderson (PacNW)

>

Re: Help with hardware

#3

Re: If you buy the plan

David in Indy

>I bought that hardware, which works fine, along with a plan for a nice cherry sewing cabinet that Rockler sells. I have it, on very good authority, that although the cabinet built following the plan is attractive, it doesn't work well in practice. Work out the height that the person who will actually be using the unit wants and not the plan's dimensions. Also, think twice about including the nice-looking set of storage drawers that unduly restrict movement under the tabletop.

Re: Help with hardware

#4

Lee Valley part # 02k01.01

Dave Bair, Eaton Rapids, MI

>

Re: Help with hardware

#5

Re: Modify the plan

Dave Anderson (PacNW)

>I added 6" to the width and 2 inches to the depth. This allows SWMBO to sit centered on the needle of the machine when she sews. all of the extra length is in the knee area. My wife is 5'10" and the finished product fits her well. It pays to keep her satified, makes buying new tools much easier. I also made a custom insert instead of the wood one called for in the plan. I used 1/4' clear plexiglass.

Dave Anderson (PacNW)

Re: Help with hardware

#6

LV ! ! !

steve mackay

>