Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Craftsman air compressor woes

Posts

Craftsman air compressor woes

#1

Craftsman air compressor woes

Terry Alexander

>I have a craftsman 2.0 hp, 33 gal. compressor.

Way out of warranty.....probably driven over a million brads and nails since I have built 2 shops and a house with it and a gazillion WW projects.

It was coming up to "speed" yesterday when all of a sudden it sounded terrible. A very loud metallic clacking sound instead of a .....well .....normal "compressor" sound. Sounds like a very old car where the lifters are totally loose.....for those of you that ever had a car with metallic lifters ;-)

Model number is 919.167320

The user manual is not to be found (3 moves).

Having said/typed all of that.....any suggestions? I have not tried to run it again for fear of doing permanent damage (if it isn't "toast" already).

As always....TIA

Terry Alexander in West Texas

Re: Craftsman air compressor woes

#2

Re: Craftsman air compressor woes

Norb Schmidt - Cumming, GA

>Sorry to hear about that. I had a 5 horse 60 gallon craftsman that made a similar sound. I did the postmortem and found the teflon pistons were rubbed raw. Absent having them replaced, the compressor is toast. I then considered converting it with a new head and keeping the motor, but the motor is proprietary and has a small shaft that only fits their head. I guess you could replace the whole head, but when I checked on Sears.com it cost as much as the whole unit at one of their sales (every weekend). I went with a used IR oil found on CL, but waited a long time to find it. My research suggested that the oil compressors ran longer and quieter. Good luck with your quest.

Norb

Re: Craftsman air compressor woes

#3

Rebuilt Kits

Mark Mandell - Gone Round In Jersey

>Are available for many oil-free compressors, but knowing Sears, the kit, if available, will be close to the cost of a new compressor.

Since your unit is direct drive rather that belt driven, most unlikely you'll be able to replace the pump. Suggest you go looking for a new unit. There were some very good deals around on a far better oil lube Ingersol-Rand.

BTW consider keeping the old tank as either additional air storage by piping it into the system or use it as a portable air tank.

Re: Craftsman air compressor woes

#4

Re: Rebuilt Kits

Gene Gauss

>I repaired a Sears 5HP oil-less compressor that did the same thing. The cylinders were ok, but the pistons and cooling fan were toast (I actually noticed the problem beginning when parts of the plastic cooling fan started coming out of the plastic cover). It's really a bad design, because the crankshaft of the compressor is cantilevered off the end of the motor shaft using an unusual clamping system. Anyway, the parts weren't horribly expensive (surprising for Sears), and it

came apart and went back together fairly easily. I have another oil lubricated compressor that I use mostly, using this one as a backup or when I need a lot of air (sandblasting) because of the weakness of the design.

Re: Craftsman air compressor woes

#5

Re: Craftsman air compressor woes

George@Colonel's Workshop-Havertown PA

>Good Afternoon Terry,

I had awful luck with a Sears 2 1/2hp, 25 ga oil less compressor over the 10 years I owned it. I had it back for repair in and out of warranty numerous times, and it eventually self-destructed. Pump was beyond repair, and Sears did not support the parts. The pump and cooling veins were mostly of plastic, and I decided to scrap it. I down sized to a little Husky, which now satisfies diminished needs of my retirement. I'll never again buy another Sears product as long as I live.

George

Re: Craftsman air compressor woes

#6

George

Mark Mandell - Gone Round In Jersey

>Don't hold back, now. Tell us how you really feel!

|;-}}}}}}

Re: Craftsman air compressor woes

#7

Mark

George@Colonel's Workshop-Havertown PA

>Good Evening Mark,

I've HAD it with those people. I recall the first time I had warranty problems, they kept my compressor for 3 months, claimning they had sent it to Virginia for repair. Finally they called to say it was ready for pick up. I went to the store and they couldn't find it. When they did find it a week later, it was out of warranty, and then they wanted to charge me $84 for the repairs. I had a little prayer meeting with the manager who directed the old lady clerk to give me the tool at no charge. Then when the old lady clerk brought me the tool from the back room, she looked at me with disdain and told me "you won"! I had a very strong urge to slap her hard across the mouth, but #1 son told me to "Be cool, Dad, Be cool". I was. At the time I was doing lots of reupholstery work and needed every penny I could earn. Sears screwed me thoroughly and continually. Not never again.

George

Re: Craftsman air compressor woes

#8

Re: Mark

Fred Davis

>George,

So your saying you don't feel "safe in the hands of Allstate" ??

Just wondering here ;-))

FredD

Re: Craftsman air compressor woes

#9

Irony

Mark Mandell - Gone Round In Jersey

>Had a Sears "ONE and THREE QUARTER HORSEPOWER" [pulled about 5 amps on 110] that I just couldn't seem to kill after 10+ years, but couldn't justify buying a new machine. It finally blew a bearing so I contacted their service dept. Price quoted was just short of the price of one of their brand spankin' new routers. [Hmmm, do we detect a marketing plan here?]

Bingo! I win! The witch is DEAD! [It can't be fixed, Honey]

So off to the tool store to get my first quality router (Ryobi RE-600).

Sears' gouging got me a new router plus cured me from ever buying anything with a motor in it there again. (The ratchets ain't bad though)

Re: Craftsman air compressor woes

#10

Re: More Irony

Chuck Kettler Greenwood IN

>Have an old Sears belt driven compressor, 220V, former equipment of Bill Tindall. Both of the SS reed valves died. Went on line, found the parts at Sears, bought new reed valves and a belt for about what the shipping cost and had the parts in 5 days. Direct drive units have no mechanical advantage so it is no wonder they roll over and die at an early age. Hunt for an old belt driven and it will be your last.

Re: Craftsman air compressor woes

#11

Re: Mark

Howard Norman

>So your saying you don't feel "safe in the hands of Allstate" ?? <<

Fred, as I recall, Sears sold/spun off Allstate a long time ago.

Re: Craftsman air compressor woes

#12

Re: Craftsman air compressor woes

Barry Irby

>I have a belt driven Sears (made by Emerson) Compressor I bought in 1971. I use it in my shop to drive brads and nails and whatever else I can find to do with compressed air. Changed the oil in it twice in thirty eight years. I'm 59. Wonder if it will retire before I do? I'd gripe about it, but it doesn't seem fair.

Re: Craftsman air compressor woes

#13

Re: Mark

Fred Davis

>Howard your undoubtley right , but elder citzens such as myself will tend to associate AllState with Sears and ..........Ed Rymer , the albino who spoke for them.

And I believe George fits the elder part :))

FredD