Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Long-Term Stationary Tool Storage

Posts

Long-Term Stationary Tool Storage

#1

Long-Term Stationary Tool Storage

Steve in East Tennessee

>If one needed to store stationary power tools for an extended length of time, what recommended prep work should be done before storing them? Storage may or may not be climate-controlled.

Is cosmoline available for purchase? Seems like one obvious thing to do would be to coat the cast iron working surfaces and then apply poly sheeting over the top of the coating. Any additional suggestions?

Re: Long-Term Stationary Tool Storage

#2

Re: Long-Term Stationary Tool Storage

Phil in NJ

>One product you might consider is Boeshield T-9... as the story goes it was developed by Boeing specifically for long-term storage of parts that would otherwise corrode.

I've used it but not for very long-term storage so can't vouch for its efficacy.

One thing to consider is dessicant as well. Put on something like T-9, then put a large bag of dessicant crystals inside the machine, and then wrap it totally so that the moisture level is kept low...

-Phil

Re: Long-Term Stationary Tool Storage

#3

Gear oil

Mark Goodall - ATL - tooljunkie

>I put heavy weight gear oil (not motor oil) all over the cast iron and then put thick paper over it which absorbed the oil and kept in in place. Worked well for about 6 months.

Happy Woodworking!

Re: Long-Term Stationary Tool Storage

#4

LPS 3 *LINK*

Nathan

>I've heard good things about LPS 3 for this application.

Specs say "protects steel parts indoors for up to 2 years."

Here's link to specs.


LPS 3

Re: Long-Term Stationary Tool Storage

#5

Re: LPS 3

Ken Oakley-Sunny St. Cloud, Fla.

>I worked for Mercury Marine, the outboard motor manufacturer and that is what they sprayed on the injection molding molds when they were put in storage. I obtained a few cans and use it to prevent rust on my tools here in humid Central Florida.