We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Would someone sell me two pieces of quarter sawn cherry or Beech without knots. I need 2 pieces 1 1/4 x 3 1/2" x 10" to try my hand at making a pair of hollow and round hand plane. For some reason it just isn't available in Texas. Just tell me how much including TT&L including freight.
>...if nobody else replies. I think I have some cherry out in the shop, although beech might be the preferred wood for this. I would also suggest posting your query on the Hand Tools board.
>Can you glue it? I've got some cherry that is a rough 2 3/4" thick. It is plain sawn, but the 2 3/4" portion would be quarter sawn. It is about 6 1/2" wide. I've got a few board feet.
I went down and checked, and I have some QS cherry in the dimensions you need. (Actually, the cherry is about 4"x4" -- maybe about 5"x5" in some spots -- so I can cut the pieces you need easily enough.)
Contact me with the particulars on where to send it, and I'll have it in the mail to you on the morrow.
>Do you need kiln dried? I have a stack of cherry in my saw yard that's been air drying for a year which may have what you need. I have cherry logs and could easily cut some green but I don't think that would help you!
I looked at my really dry cherry turning stock and I have some 3.5" wide x 2.9" x 16" blocks but I see a small knot in a edge of one and a defect in the side of the other - I'd have to cut a couple up to see if the defects interfere if you can't find clear wood elsewhere.