Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E. Peacock

>9 Mar 2009

Good Morning,

It's been some awesome weather here with temps in the 60's and 70's allowing the whole family to have a nice time outside. Of course this marks the time for us to start doing yard work once again as well as getting everything ready for our vegetable garden.

A little more feedback that I've gotten about the Black Walnut Kitchen Table project that I just finished and delivered is that the new owner is "still" bragging on the table and invites people to come by and see her new table. I like a happy customer.! She now wants me to make her a matching set of coasters for her table as well as one of my end-grain cutting boards. Of course, I'm going to gladly oblige.

I opened all the shop doors and aired out the shop yesterday after church and then I took a very well deserved nap. It was then time to spend some time with the family and watch a movie. It was an episode of "Ma and Pa Kettle". Anybody remember them? My kids loved them.!!!

BTW, if you like jazz music and you like a good sax player? Check out "Merlon Devine". I got turned on to this dude yesterday and his stuff is awesome.

Getting ready for rain and storms here today and tomorrow. So here's to a safe an non-adventuresome spring (weather wise I mean).

I'm now working on a restoration project for a lady at work of a very old "School Desk" that was her mothers many years ago. I sure wish I knew of a way to get paint and rust off of metal other than sanding it off. Anybody got a sand blaster? Photobucket

That's it for me, so what did YOU do this weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Maple Jewelry Box

Ed Beck

>This has been many weekends in the making, but I finally finished. This project is the first one that I�ve done completely on my own and took months to finish. I had a few side trips along the way as I learned new skills and made a sled.







I've uploaded a few more pictures.

Thanks to everyone who gave me help along the way.

Re: WC Weekend Accomplishments....

#3

Re: Maple Jewelry Box

paul waddle

>Nice work,beautiful Cherry. pw

Re: WC Weekend Accomplishments....

#4

JL

Nice jewelry box.

JL

>I like the design and the stain. Had you considered flocking or lining?

Re: WC Weekend Accomplishments....

#5

Non-productive but necessary...

Pat Evans

>I finally bit the bullet and replaced the old chewed up fence on my RAS table. Also had to spend considerable time realigning the saw. Many months ago, I had a brain fart and tried to rip a board from the wrong direction. That torqued the saw out of alignment and I haven't used it for anything but very rough cuts since. Nice to have the saw useful again.


img

Re: WC Weekend Accomplishments....

#6

Cherry Jewelry Box (Not Maple)

Ed Beck

>I don't know why I said it was maple, that's cherry.

Re: WC Weekend Accomplishments....

#7

Excellent

Lee Schierer - McKean, PA

>Excellent staining job it looks just like curly cherry. ;) Very nice use of some really nice cherry. I'm sure the owner will cherish it for many years.

Lee

Re: WC Weekend Accomplishments....

#8

Elegant

Clint Searl, at the base of Haycock Mtn

>I particularly like the inclusion in the top.

Clint

Re: WC Weekend Accomplishments....

#9

Miscellaneous

Ellis Walentine, Host

>To celebrate the warm weather, LOML and I went for a short but strenuous bike ride on Saturday and remembered a lot of muscles and joints we had forgotten over the winter. Yesterday I went to the monthly shindig of the Appalachian Fiddle and Bluegrass Association and got a chance to pick some bluegrass and old-timey tunes with some pretty serious musicians. I like bluegrass (in small doses) but the last time I went to one of these meetings was over 30 years ago. It felt good to do it again.

I also took a nifty picture of sunrise over the shop.

Ellis


img

Re: WC Weekend Accomplishments....

#10

Source and Flocking

Ed Beck

>Thanks, I got the design from Fine Woodworking's An Elegant Jewelry Box.

I made this for my wife, and we figure that lining or flocking is a one-way trip, so we decided to try it out for a bit and make the decision after some use.

The smallest comapatment in the top tray is for a ring holder. This will be made from foam rubber with fabric overlayed, and folded together to make the furrows.

Re: WC Weekend Accomplishments....

#11

The Garage Is Clean!

Robby Wright in San Marcos, CA

>Our garage/shop space is divided into two sections: the larger two car garage is mostly my shop and the one car garage section and a lttle of the two car space is general storage and pantry. We have been working on cleaning and reorganizing the shop and this weekend, the rest got a makeover.

My oldest son, Chris, went to put his surfboard into the storage side and a bunch of stuff came down and hit him in the head. In retaliation, he tore everything out of the storage garage, sorted all the junk, (it's amazing how much can be accumulated!), and loaded it all in his truck for a trip to the dump. Then he organized everything that we didn't need and could be sold and held a garage sale Sunday. He made a tidy sum.

I got into the act by sorting all of the foodstuffs and drinks stored in there. Chris and I put up a bunch of Home Depot wire shelves and I stacked all the foodstuff and drinks on it. There is actually clear space there now! Amazing!

Sunday, I got my new Grizzly G0586 jointer out, lined everything up and made some shavings. It cuts really nice, but it was making a racket. I fussed with the belts, but it didn't stop the noise, so I slipped the belts off and started the motor without a load. It sounded like it was grinding coffee, so I called Grizzly and they are shipping me a new motor. The bearings definitely have problems. I am looking forward to having this tool available for everyday use, as it did a nice job cleaning up some twisted poplar that I was milling for a new outfeed table. Now I have to recondition my planer to handle the parallel faces.

Getting close to a finished, reorganized shop and posting pictures.

Robby Wright