Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

30" scroll saws

Posts

30" scroll saws

#1

30" scroll saws

McKay

>Because RBI is no longer in business, I am looking for a different scroll saw. I have used Hegner (not impressed), Delta (again lacking), RBI (very pleased). General International wants my first born grandchild for their 30". A few years ago I remember an article in some magazine of a professional marqueter who made his own rather large scroll saw. Any ideas would be appreciated and if you happen to know the article that I am referring to I would really like to know the magazine. Thanks in advance.

Re: 30" scroll saws

#2

Re: 30" scroll saws *LINK*

Carol - now back in Dubuque, IA

>Try this.


Home Made Scroll Saw

Re: 30" scroll saws

#3

Re: 30" scroll saws

paul waddle

>I can't remember either,but the fellow l'm thinking of,built is own saw and then started selling them. Its supposed to be the very best,BUT,I remember it was more costly than the Hegner or the Excaliber . I just forgot about it. I like the old type excaliber(made in Canada),but I'm not enthused about the new design of Excaliber-its expensive too.

Try the woodworking mags that compare different types. pw

Re: 30" scroll saws

#4

Re: 30" scroll saws

chuckbeck in cent il

>Are you thinking of Woodwork magazine issue #101 with Brian Condran?

chuckbeck

Re: 30" scroll saws

#5

Re: 30" scroll saws

Curly Smith

>This isn't the article you were refering to but it might give you some ideas. This Home Made Scroll Saw looks to be based on the Roy Underhill article in Popular Woodworking (Oct 2000) that you can now download here: Foot-powered Lathe and Scrollsaw

Both are "foot powered" but can easily be converted to electricity and you might be able to scale-up to suit your needs.

Re: 30" scroll saws

#6

Re: 30" scroll saws

jcousins

>i've been using a hegner for several years - and really have liked the machine - i primarily use the saw for marquetry - the double bevel technique - but wanted a deeper throat - so now i have a 30" excalibur sitting in the shop - have only made a few cuts on it but they worked, which is a good start. seems to be well built - i like the fact that the arm pivots rather than the table (i usually have it set at 7 degrees)and look forward to figuring out the movable upper arm and threading through the top.

the home built saw is in woodwork 101 - plans can be purchased at the college of the redwoods fine woodworking school in fort bargg - i think they are $15.

jerry