We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Two days ago I was cutting lots of small pieces of different exotics(making small clipboards). Yesterday I ended up up with a swollen eye lid. It had remained the same for two days now. I suspect toxins in the wood dust. I have dust collection, etc, but?
Has any body had this type of reaction from exotics? If so, did it go away or is there something a doctor can do? Thanks. Nick with the sore eye in So Cal.
>You might look at Woodcrafts website, I recall seeing some info on sawdust and health hazards from exotic woods. might be a good idea to go on to the doctor if it's been this long and no relief.
>Nick, some woods ca be very toxic with a wide range of effects. There are several charts available that list the toxicity. I think the AAW (American Association of WoodTurners) has one and so does the the Forest Products Laboratory. I used to have them bookmarked, but had a computer crash. Google Wood Toxicity. Ask your question on the Turning Forum, Toxicity comes up often there.
Wash out the Eye and try Benadryl. (I'm not a doctor and don't pretend to be one. So, that advice is worth what you paid for it.)
>I think sensitivity varies by species/individual exposed. I had a pretty nasty respiratory reaction to padauk sanding dust. Lots of coughing for a day or 2. I can imagine had I gotten any in my eyes it could have been a problem.
>Very interesting info available. Also, a day or so before cutting the exotics, I was chainsawing and cutting redwood rounds on the bandsaw with semi-dry dust all over the place. I didn't want damp sawdust from the bandsaw in my dust collection system. No wonder I got a reaction. Thanks all for the help. Nick
Woodturners work with exotics often and many have had or have developed reactions - it seems that once you become sensitive, it only gets worse. Some people are so allergic to Cocobolo, one of the worst, they can't even use a lathe that has been used for Cocobolo recently. I get a rash if the dust gets on my skin, so I wear long sleeves and an industrial respirator. I don't power sand and try to make as little dust as possible. I've never gotten dust in my eyes but I bet it would be a problem for me as well.
If this is still bothering you after a couple of days, you might see your eye doctor. I suspect some fine dust is still present and may need to be flushed away. Besides the benadryl, a doctor can also give you a shot which is quicker and more effective to counteract the allergic reaction.
If you want to discover exactly which species are a problem for you, an old trick is to put a little dust under a bandaid or a piece of tape on the under side of the forearm. After a few hours or a day, it will be obvious which woods to avoid. Besides Cocobolo, I'm also somewhat sensitive to eastern red cedar.
>I know several woodturners who say, "if your not allergic to rosewood, you will be". That would be any wood with Dalbergia in its latin name, such as Cocobola, African Blackwood, Bois de Rose, Tulipwood, Kingwood and of course any of the many woods with rosewood in their common name. I haven't had a problem yet, but I do try to be careful whenever using any rosewood.
>A few weeks back I turned a pair of 12in bowls of cocobolo for a customer. After the first few minutes on the lathe I was on my hands and knees in a fit of sneezing that would not stop until I went outside and took some deep breaths. That forced me to use my positive pressure face mask and the problem was solved. But, I still wore long sleeve shirts, buttoned up tight, a jacket, and a medical paper face mask when the lathe was turned off. Never again! Phil