Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Pocket Screw and Glue

Posts

Pocket Screw and Glue

#1

Pocket Screw and Glue

Stuart Johnson

>I'm building a sewing cutting table that is basically six file cabinet size cabinets. I'll be assembling them with pocket screws. How important is it to use both glue and pocket screws? I made several cabinets for the shop with just the screws and one with both screws and glue. I have not seen any difference but did find assembling using glue was messy.

Re: Pocket Screw and Glue

#2

Re: Pocket Screw and Glue

Dave Tenney

>Norm uses glue!

But as you say, I can't see how gluing long grain to end grain would hold very well. The last three cabinets I built I used glue on, but I'm not sure if it is really needed...especially after the face frames are glued and biscuited to the carcass.

Re: Pocket Screw and Glue

#3

I vote for glue

Dick Coers

>

Re: Pocket Screw and Glue

#4

Re: Pocket Screw and Glue

Fred Davis

>Glue is better then no glue , much better then fastners alone, except where cross grain glueing is avoided.

FredD

Re: Pocket Screw and Glue

#5

Re: Pocket Screw and Glue

Dave Tenney

>If I get a chance this weekend I'm going to put a couple joints together both ways and see if the glued joint is harder to break....

Dave