Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E. Peacock

>2 Mar 2009

Wow! Where did February go?! We've experienced some days of nice spring-like temps here and this morning it's 22� F and supposed to be near 70� F by the end of the week. I guess it's about time to start looking for firewood once again.

I finished up the Walnut Kitchen table project and delivered it to it's owner last week.

40" wide by 74" long and 30-1/4" from the floor to the top of the table top.

Black Walnut and Red Oak. Wood was cut, stickered and air dried for over 40 years in the customer's father's old barn.

The Red Oak had severe Ring Shake and also shown strong signs of being hit by lightening. There wasn't much of the Red Oak that I could use that wasn't coming apart when cut or planed.

Finish is:

1-1/2 pound cut of Dark Garnet Shellac

5 coats of Semi-Gloss Deft Lacquer

Walnut Kitchen Table

Red Oak Patches to tie it all together

Highly Figured area with Dutchman Patch

Walnut feathering

The new owner was "more" than pleased with the end results and I was just glad to have it done to exceed their expectations.

We got out 1st NetFlix movie last week and we all seem to like this deal of NetFlix well enough and the LOML/CFO decided that $9 a month for 4-6 movies a month was a great deal cheaper than buying or renting them at the local movie rental store. The really cool thing is that you really never know which movie they are going to ship...so it will be a "surprise". The family like that.!!!

Worked at the day job on Friday / Saturday and played bass at church on Sunday and watched a movie with the family last night.

Will be spending some time with the family today and tonight to try and make up for lost time while I was working many wild hours and long weeks at the day job.

So what did YOU do this weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments....

#2

Made a mess of the shop

Bill Earl

>I did a small run of molding on the shaper. I was using a corrugated cutter head with custom-ground knives. The bigger profiles generate a lot of chips, and this cutter head has no inherent anti-kickback feature, so I took extra care setting up the power-feeder, adjusting the guards and rigging an auxiliary shroud for safety and efficient chip extraction.

I powered up the machine and everything seemed to be going just fine. When the machines are running, I do my best to keep my eyes on the action and not get distracted by anything else. The sticks were feeding smoothly, the cuts were clean and the dust-collector was getting better than 95% of the waste.

After feeding the last stick, I shut the machine down and turned around in time to see a big plume of chips blowing out of the dust collector. The duct fitting on the blower output of my aging dust collector had split open and the back half of the shop was covered in chips. I spent the rest of the day patching the dust collector and cleaning the shop.

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Mike Fitterling

>That's some pretty walnut there, Dennis. I usually don't like to use color on any wood, but I have done that garnet shellac followed by lacquer on walnut and that results in a beautful color that still shows off the beautful wood grain.

I finished putting up the shelving in the new office closet and then headed out to the shop to fit the arbor guard I just picked up onto the blade guard for my Dewalt GA RAS. Did some reorganization of the lumber storage building in anticipation of some walnut, sapel, and bloodwood on its way to me March 14th.

Cheers,

Mike

Re: WC Weekend Accomplishments....

#4

cutting board(s)

paul in AZ

>My kitchen cutting board finally looked ratty enough to replace so I glued up some semi-scrap strips of hard maple, cherry and wenge; cross cut this and glued them into an end grain board. Mentioning it to a friend, she decided she had to have one. Another came over and saw the projects and just that fast it was three cutting boards. the last 2 out of maple, cherry and walnut.

Quick, easy and very satisfying little pieces.

Caulking and touch-up painting the outside of the shop gave me something to do while the glue set up.

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Ellis Walentine, Host

>Hi Dennis,

That sure is a nice looking table. I'm glad it went over big with your customer. That's what really counts.

We had an unusual weekend with three parties in two days. It'll take me a month to lose the extra weight. Oh well, it was fun, even though it meant missing the Somerset show.

In the woodworking department I found the time to turn one more bottle stopper, this one out of blackwood. Boy, that stuff really takes a polish. I also did some comparative planing using various planes on a chunk of Port Orford cedar (best smelling wood anywhere, IMO). That was informative as well as fragrant. It even drowned out the cigar that my neighbor brought me from one of his flights abroad. It's nice to have a pilot for a neighbor. He's in Scotland this week. I wonder what he'll bring back this time? :-)

Other than that, LOML and I made our hotel reservations for the Albuquerque AAW Symposium in June. Can't wait for that.

Happy woodworking,

Ellis

Re: WC Weekend Accomplishments....

#6

Had a Killer Weekend on Ebay

Ken Oakley-Sunny St. Cloud, Fla.

>Sold over $300 worth of pen blanks. One person spent $92 on twelve little blanks.Another spent $130 on 40 blanks. Sure do like them penturners---

Re: WC Weekend Accomplishments....

#7

Invested in Several Banks

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis,

First off, that is a spectacular table. The grain is superlative, and matches your craftsmanship.

The shop hummed this past weekend. I came across an old Shop Smith article (No 41, Sep/Oct 1985) which showed a Toy Bank Truck. I thought it woukld be appropriate for one of the grandkids. Then I counted grandkidss and assessed ages, and decided I had enough wood to make 8 of them. So I cut cherry, aromatic red cedar, maple, poplar, and African mahogany. Kind of a fun project, and its using lots of scrap hardwood. I'll post a pix of the "fleet" of trucks when I get them finished. Great dinner party last night.

Have a great week.

George