Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Dust collector filter question *LINK*

Posts

Dust collector filter question *LINK*

#1

Dust collector filter question *LINK*

David Sparks

>I'm getting ready to order an Oneida 3 hp V3000 cyclone dust collector. I appreciate the input you have given regarding the package deal Oneida is offering. The package includes a HEPA filter in the place of the standard filter. My concern is that the HEPA filter they are including is smaller than the one Oneida recommends for the 3 hp V3000. The HEPA filter included with the package deal is 13"x26" and the HEPA filter listed for that model in Oneida catalog is 13"x39". Do you think this filter will allow enough airflow for the 3 hp cyclone? I asked the sales rep at Oneida, and he said the filter would be fine. I will appreciate any opinions you all have before I spend the money. Thank you.


http://store.oneida-air.com/v-3000recessionbusterp

Re: Dust collector filter question *LINK*

#2

Re: Dust collector filter question

Curly Smith

>I'd ask Oneida if they'd substitute the 13"x39" filter for the difference in cost. The 13"x29" filter has 1/3rd less surface area than the 13"x39" filter (63 sqft vs 95 sqft) which will be seen by the unit as a "dirty" filter. You'll also get less useful life from the filter because of the pressure drop inherent in using a filter with less than the designed surface area. If your current requirements are well below the design parameters of the V3000 and you're buying the unit, as opposed to a smaller unit, for future requirements then maybe it's OK. But, if you need the performance of the V3000 then the smaller filter is a problem.

Re: Dust collector filter question *LINK*

#3

Re: Dust collector filter question

David Sparks

>Hi Curly,

Thanks for the response. I don't think I really need a HEPA filter, so I'm thinking about getting the regular larger filter instead. I can't really spend much more money now. I do think the filter Oneida has in the package deal is too small. Thanks again.

David

Re: Dust collector filter question *LINK*

#4

Re: Dust collector filter question

Fred Davis

>I would direct any questions about their product to Onieda , they are the experts.

As for filter concerns , Onieda's cylcone removes 99% of the dust particles with the cyclone, so the filter size is not really a factor, CFM airflow is and that is where the cyclone shines.

For my own experience with Onieda , I have a 3 H.P. cyclone with a six bag house of filters with a five gallon bucket on the end of each eight foot bag and there is no dust at all in the buckets.

FredD