Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Anyone Rebuilt a Nail Gun?

Posts

Anyone Rebuilt a Nail Gun?

#1

Anyone Rebuilt a Nail Gun?

Barry Irby

>I have an old Senco nail gun That shoots finishing nails up to 2 1/2". It works, but it leaks air constantly. (Hisses). I can take it to the shop but I was wondering how hard it is to rebuild one? Where do I get the Parts? Anyone rebuilt one? I just don't want to let the magic out.

Re: Anyone Rebuilt a Nail Gun?

#2

Re: Anyone Rebuilt a Nail Gun?

Joseph Mulherin, Sr

>Barry, I have rebuilt two guns I got from Harbor Freight. There are some "O" ring gaskets inside that will deteriorate in the presence of the oil that lubricates the gun. Take one apart and replace the rings and it should operate once again.

Re: Anyone Rebuilt a Nail Gun?

#3

Jim DeLaney, Austintown, Ohio

Re: Anyone Rebuilt a Nail Gun?

Jim DeLaney, Austintown, Ohio

>Kits are readily available for Senco guns. There's probably a 'contractor supplier' in your area that has them. If you can't find a kit locally, try calling the tool repair/parts desk at Hartville Hardware [330-877-3631]. They'll have what you need.

Jim D.

Re: Anyone Rebuilt a Nail Gun?

#4

Re: Anyone Rebuilt a Nail Gun?

Fred Davis

>Barry,

all my nail and staple guns are Senco ,old models when they still made them from cast iron .

I rebuilt some of them using rebuild kits available from any tool repair shop, or Senco dealer.

It's mostly the O rings that fail and replacing them fixes the problem and gives you the opportunity to lube the internal spaces at the same time.

FredD

Re: Anyone Rebuilt a Nail Gun?

#5

Re: Anyone Rebuilt a Nail Gun?

Jorge Castaneda ~ Downeast Maine

>Barry,

I had same problem, went to repair and they slapped me with a bil for $1, all there was to it was to replace an o ring and too a couple minutes.

Jorge