Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Slab Sources???

Posts

Slab Sources???

#1

Slab Sources???

Mark Mandell - Gone Round In Jersey

>Have been asked to do a live-edge slab dining table. I'm therefore looking for a source of slab stock within a 50mi radius of Trenton, NJ, preferably with a variety of species, where I can take the client and have them pick out the piece they want. They have expressed a preference for a single piece, but will also consider a bookmatch situation. They're looking for at least 39" width and 8/4.

Tried Woodfinder, but the engine is really set up for species-specific searches that aren't helpful in this situation.

TIA

Re: Slab Sources???

#2

Re: Slab Sources???

Joshua A Clark

>This might be a little farther than 50 miles, but I would recommend Berkshire Products in Sheffield, MA. He's got an amazing selection of slabs. Some of his stock is online here: http://www.berkshireproducts.com/prodib1.htm

Hope this helps.

Josh

Re: Slab Sources???

#3

Thanks

Mark Mandell - Gone Round In Jersey

>Joshua,

That's too far a hike, and this has to be an in-person choice.

BTW, tried their website and it appears down at this point. I try again later.

Thanks again

mm

Re: Slab Sources???

#4

Thought of another

Joshua A Clark

>You might want to try ML Condon in White Plains. Their lumber selection is fantastic. They don't normally carry a lot of slab wood, but they do have some interesting stuff. Last time I was there they had some cherry burl slabs.

Good luck!

Josh

Re: Slab Sources???

#5

Re: Slab Sources???

Scott in Douglassville, PA

>Mark, you might want to try Hearne's or Talarico's. Both should be within driving distance for you. There are some others nearby, too, but they tend to be smaller; Hearne's and Talarico's generally have a ton of really special stuff.

Good luck.

Re: Slab Sources???

#6

Thanks

Mark Mandell - Gone Round In Jersey

>Know Hearn's, but have bookmarked the other.

|;-}

Re: Slab Sources???

#7

Re: Thought of another

Barry Mabery

>I stopped in M.L. Condon earlier this week and they have expanded their slab selection. They probably had 20 or so slabs - domestic and exotic - in lengths up to 8 ft and varying thicknesses. Pricey, but I saw a very nice cherry and a beautiful walnut slab that I couldn't tear myself away from (but didn't buy).

Re: Slab Sources???

#8

Re: Slab Sources???

Thomas S Stockton

>I used slabs in the search line and a few came up for NJ and PA

Tom

Re: Slab Sources???

#9

He's in Woodfinder, too *LINK*

Ellis Walentine, Host

>Mark, I did a search for "slab" in Woodfinder and found several in NJ and PA. Berkshire Products also shows up there.

Ellis


Berkshire Products in Woodfinder

Re: Slab Sources???

#10

willardfinefurniture.com

Clint Searl, at the base of Haycock Mtn

>

Re: Slab Sources???

#11

Re: Thanks

peter kolb

>I have not been there in a while but Wilard Bros. in Trenton had walnut slabs. Peter in south central NJ

Re: Slab Sources???

#12

Re: Slab Sources???

Joanne in Pt. Pleasant, PA

>You might try John Kirlew at Bucks County Hardwoods. His small mill is in Doylestown (outside of town), down the road from me. He usually has big slabs of walnut and cherry (not sure what else). Email me if you want to try him and I'll send you his cell number.

Re: Slab Sources???

#13

Re: Slab Sources???

Ken Platt (granby, CT)

>As Clint posted, Willard Brothers. They used to have a pretty good selection of slabs. I found their web site at http://www.willardbrothers.net/. I haven't been there in many years, might have changed.

Ken