Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

ot-how to hookup laptop.

Posts

ot-how to hookup laptop.

#1

ot-how to hookup laptop.

fred in ct

>i got a new laptop and have at&t uverse for my provider for my desktop pc. my question is how do i get at&t to recognize the laptop? do i need a wireless card?i have a wireless router. i guess i'll call them later. thanks fred.

Re: ot-how to hookup laptop.

#2

Re: ot-how to hookup laptop.

John McGaw

>It really depends on what sort of modem you have. What sort of ports does the modem posess? Some AT&T-provided modems already have a router included and need only the addition of a hub or switch to have multiple computers share the Internet connection. But the simplest answer to your question and one which applies almost universally is that you plug a cable into the computer and to the modem but that may not be what you want to do. IMHO, wireless is a needless complication (and somewhat of a security risk) and is justifiable only when you really need to wonder around with your computers or running proper cables is impossible.

Re: ot-how to hookup laptop.

#3

Wireless is a needless complication?????

Ed Beck

>You must be joking, wireless is a wonderful convenience. I bring my laptop everywhere in my house, and that includes the garage when I�m woodworking.

In the garage I can use it not only to listen to pretty much anything piece of music that I want (through the Zune Marketplace), watch or listen to the Red Sox (through MLB.com ) but also to pull up the SketchUp diagram I�ve created for a look at what I�m working on, maybe at a different angle than what I printed out, going off to Fine Woodworking to take a another (often closer) look at the plans I�m following, or off to You Tube to look for a video showing what I�m trying to do.

Then there�s the one or two nice days up here in the Pacific Northwest when I can take it outside to sit under the arbor I built, look up how to get those grapes to grow faster, and �work�.

Nope, 200� of Ethernet cable aint in it.

Fred � you most likely have everything that you need to connect your laptop to your wireless network. Most laptops come with built in wireless, the key words to look for are WiFi, or 802.11.

Take a look at this post part "b" of which discusses wireless connection. I was replying to someone who had Vista installed, but the instructions for Win XP are similar. There�s also a section in there where I talk about wireless security.

You have a very good point about calling AT&T up. When I connected my mother-in-law�s wireless network there were some special instructions that applied only to Qwest, which is where she gets her internet connection from. They will know the specific things that you need to know to connect to your wireless router.

Re: ot-how to hookup laptop.

#4

Re: ot-how to hookup laptop.

Ralph Lipeles

>I'm in CT too and also have at&t for my DSL line. The modem that I hade to buy from them, 2 Wire Device, has provision for connecting 2 computers. It has a USB cable and also another cable that looks like the new style printer cables. It also has wireless. There is a switch on my laptop for wireless connection. Make sure that it is in the right position.

Re: ot-how to hookup laptop.

#5

Here's a trick

Mark Goodall - ATL - tooljunkie

>Call AT&T and tell them that you want a wireless router and that you don't want to pay for it. They'll often usually send you a 2Wire wireless router for nothing, rather than risk you switching to another DSL provider.

In the old days (old in technology is anything more than 6 months) DSL providers supplied a single-PC modem. If you wanted wanted mutiple PC's you'd pay extra from a modem-router, and if you wanted wireless you paid even more. They'd charge you extra for the device and/or an extra monthly "home networking" fee.

This is one of the reasons that people like me and companies like Linksys became so popular. It was cheaper to get a Linksys device rather than pay all the extra fees to the phone company. But if something went wrong with your equipment, their support techs in India wouldn't help you until you removed all your own equpiment.

Today, they'll just provide you with a full wireless-router-modem all-in-one unit for nothing. While it eliminitaes business for me, it's infinitely easier for you. Just make sure you don't pay the $149 installation fee. Simply call them when you receive the equipment and they'll step you trhough it for free.

Now if you want to get something fancier, like a wireless-N router with extended capabilities, then you're back to doing it yourself again. But that's just until the DSL companies step up and offer it.

DSL providers are usualy about 12 months behind, so as long as you don't need the latest and greatest they should be able to provide it.

Happy Woodworking!

Re: ot-how to hookup laptop.

#6

Re: Wireless is a needless complication?????

John McGaw

>As I wrote "IMHO, wireless is a needless complication (and somewhat of a security risk) and is justifiable only when you really need to wonder around with your computers or running proper cables is impossible." And I stand by that statement other than my use of "wonder" instead of the proper "wander".

In some (in my experience, many) cases getting wireless working properly and securely is beyond the capabilities of some non-technical users. I've been working with computers since 1975 and communications a decade longer and I've had my own wireless glitches. So if a person really does not need to "wander" around with a laptop and actually is in a position to install cables I believe that they are better off with the latter solution. This is not even taking into consideration the speed of a cabled solution using a gigabit LAN. The security angle should be pretty obvious -- I've found that a good 10-20% of wireless LANs have badly implemented security or no security at all. If you don't need to or are not sure of your own capabilities and knowledge wires remain the safe solution.

Re: ot-how to hookup laptop.

#7

got it hooked up

fred in ct

>spoke to dom in Bangladesh and he stepped me thru it, pretty simple anyway. i already have a 2wire modem and just had to get it to recognize the laptop.

Re: ot-how to hookup laptop.

#8

Concur.....

Mark Goodall - ATL - tooljunkie

>From what I've seen (I've seen hundreds) I'd say about 75% of user installed wireless was done incorrectly. Manufacturers are getting better at making this easier to install properly, but most people don't have the knowledge or patience to set these up properly if it doesn't work first go.

And I can't tell you how often people call me to help recover from problems using software that connects to networked shared databases (quickbooks, business contact manager, access databases, etc) only to find that they insist on using wireless instead of the Gigabit ethernet they have. Either because they don't know or don't appreciate the difference.

I've been setting up wireless since the mid-90's when we invested $6000 for a small office ($3500 for a WAP and $350 for each laptop). Wireless today is amazing, but still misunderstood and problematic.

Happy Woodworking!

Re: ot-how to hookup laptop.

#9

I don�t

Ed Beck

>As for throughput, the average home user is not going to realize the difference between a`wired and wireless connection. I routinely stream music, video and entire baseball games on my wireless network. About the only time that I do notice any degradation is when I�m downloading GB size files from work, which is not that often.

Setting up and securing wireless networks is becoming easier. In the case of my mother in law�s network, I had to find the MAC address and an encryption key (both displayed on the outside of the router) and plug them into easy to understand text boxes on the browser pages that configured the network. Nice and easy.

I use a Linksys router at home, and while it does have easy to hook up instructions, the same is not true of securing the network. It does require knowledge of networking concepts to configure, but I don�t recommend it to people who don�t have a hope of setting it up.

As for problems with network shared databases, there are problems if the application is poorly designed and does not use transactions. These poorly designed application and will have similar though not identical problems if multiple users are all wired to the database.

Lastly, my impression is that the original question was about a home network. Downloading huge amounts of data or multiple users on a database do not apply to the vast majority of home networks. In businesses where it does apply it is the responsibility of the business owner to ensure the integrity of the data, which includes securing their network and using well designed applications.

WiFi is a very convenient technological improvement that makes it easier for people to use computers in their lives instead of having to modify their lives to use computers.

Re: ot-how to hookup laptop.

#10

Re: One note of caution

Brian in Brighton

>Mark, Can you briefly explain how to make sure you lock out the router? The difference between broadcasting and nonbroadcasting and the basics of some issues of neighbors "borrowing" bandwidth if you leave the system unlocked? Would it be different with a network server vs just a few computers that don't talk to eash other?

Brian in Brighton

Re: ot-how to hookup laptop.

#11

Locking

Mark Goodall - ATL - tooljunkie

>In general, there are TWO types of locking involved.

Locking ROUTER - first you must set a password on the router itself. This is to prevent people who can already access the router (either wirelessly or by cable) from accessing the router's interface (configuration) pages and seeing the rest of the security settings.

90% of routers I find don't do this properly.

Locking WIRELESS Access - this is the most important as it prevents people from USING (connecting to your network and your Internet connection) the router wirelessly. By setting a WPA password, it will prevent anyone connecting to the wireless without knowing that WPA password. WEP is an older more complicated and less secure method, but better than nothing. Then in addition to that you can hide the SSID (the wireless name it will broadcast to the public to see.... little like call letters at a radio station) whihc means you would need to KNOW the hidden SSID in order to connect to it. Also you can have a MAC address (think of it as a serial number) that will onyl allow predefined laptops from connecting to the wireless connction. Because people get new computers and have friends visit so often, it's usually more trouble than it's worth to hide the SSID or use MAC filtering. But it's important to have a WPA password. I'd say about 50% of the ones I've run into don't have that set properly.

Happy Woodworking!