Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Alan Young, about the piano wood *LINK*

Posts

Alan Young, about the piano wood *LINK*

#1

JL

Alan Young, about the piano wood *LINK*

JL

>I had the Piano book I mentioned sent to me by interlibrary loan.

It was on a Steinway concert grand.

Outer case - multiple plies of hard maple - thin sliced and laminated together. Frame is maple.

Sounding board - Sitka spruce - this is underneath the cast iron plate and above the frame.

Ribs for sounding board - sugar pine.

Support blocks for keyset tray - black walnut.

The lacquer is an ebonized black lacquer.

http://www.steinway.com/technical/

As a side note - the factory was still in New York as of 2007. They annually get rid of spruce and other wood that is not good enough. Maybe you can go see the factory when you go to NYC.


Online Factory Tour

Re: Alan Young, about the piano wood *LINK*

#2

Alan Young

I forgot!

Alan Young

>Thanks JL,

I ordered that book from B&N... It should be in by now. At this point circumstances are conspiring to keep me from delivering in person. Certainly another place to explore if I make the trip.

Thanks for the info.

Alan

Re: Alan Young, about the piano wood *LINK*

#3

Re: Alan Young, about the piano wood

Mike Caldwell

>Very interesting tour. Thank you for posting it.

Mike

Re: Alan Young, about the piano wood *LINK*

#4

Re: Alan Young, about the piano wood

Don Orr

>There is a movie about building a Steinway grand piano. My wife & I saw it last year but I can't remember the name of the movie. It showed a lot of the steps of construction. The whole process took about a year. Most of the time is in tuning and adjusting the voice.

I have some Walnut scraps from Steinway that my FIL salvaged many years ago when he was a shop teacher in NYC. They had no money for materials, so he salvaged all kinds of stuff from various factories-sandpaper offcuts, reject hammer handles, scrap wood, plexiglass, sheet metal, etc. He saved some for himself and I ended up with some of it after he died.

Re: Alan Young, about the piano wood *LINK*

#5

Re: Alan Young, about the piano wood

chuckbeck in cent il

>I am a piano technician and I can't seem to find enough homes for all the piano parts I have had around. I just did another demo the other day on a piano that was done, and when reduced to a pile of parts there are a lot of them that are very useful. My favorite salvage parts are the pinblock and backposts. On this piano (an 1899 Schiller upright) the pinblock is a 5' long 12" wide 4" thick slab of QS rock maple, and the back posts are real nice maple that has a fair amount of birdseye in it. The pinblocks make a great second bench on a couple of low-horses.

An added benefit is getting paid to take it out!

chuckbeck

Re: Alan Young, about the piano wood *LINK*

#6

pianos and woodworking *LINK*

John K Jordan

>I'd love to tour a piano factory. There was a How It's Made segment that I see is on YouTube now. (link) It might be interesting to woodworkers in general - glued lamination, precision hand tool work, shaping, sanding, finishing.

I have a Baldwin grand I bought in 1980 (7' grand, SF10) and the craftsmanship is excellent. I was told it was made in a building inside a building for climate control, and the action was made in a factory in Germany. 30 years of use and everything still works like new.

Might Be Marginally Interesting Category: I have the concert bench that Billy Joel used in a concert in Knoxville. I got a good deal since it was used. I eventually had it recovered, but maybe someone on eBay would buy swatches of the naugahyde that supported Billy Joel's butt. I'd gladly provide a certificate of authencation. :)

JKJ


http://www.youtube.com/watch?v=qdFejZgOHDA

Re: Alan Young, about the piano wood *LINK*

#7

piano action, hornbeam *LINK*

John K Jordan

>One more Perhaps Interesting Thing: the link below has a "virtual piano action" app that shows the motion of a typical precision action in a grand piano.

Much of the complexity is to allow very rapid repeat strikes on a key, some is to coordinate the dampers, and some is to provide a very controllable touch, far better than that of an upright piano action and flat impossible on the electronic instruments today that claim "piano-like" keys.

The action parts are made largely from hornbeam, hard maple, and ebony (for the black keys on better pianos) combined with felt, leather, and metal wires, pins and screws.

There are 5700 parts in a Renner action! It astounds me that such a contraption of wooden parts can often stand up to decades of hard use (and seasonal changes) without attention.

JKJ


http://www.rennerusa.com/VirtualActionModel.asp

Re: Alan Young, about the piano wood *LINK*

#8

Alan Young

Cool with two mouses(?) I could play chopsticks!

Alan Young

>

Re: Alan Young, about the piano wood *LINK*

#9

Re: pianos and woodworking

chuckbeck in cent il

>I went on a tour of the Charles Walter factory in N Indiana a couple years ago. It was the first time I had seen a 4" shaper head. It is actually quite amazing how little is done by hand in production, most of the hand work is in finish regulating, tuning and voicing. The guy there who does most of the stringing is a seriously fast machine. I can't find any of the pictures I had of the factory, but it is worth a day's trip. Especially since Mr Walter was the one who gave us the 2 hour tour.

chuckbeck