WE'VE MOVED TO A NEW SERVER
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Re: WC Weekend Accoplishments...

Posts

Re: WC Weekend Accoplishments...

#1

Paul Kramer

Re: WC Weekend Accoplishments...

Paul Kramer

>Hi all,

I haven't posted an accomplishment in a long time. I recently received a new Ron Brese smoothing plane and I 'had' to make a plane-adjusting hammer. I made the handle from hickory sap wood. This was my first try at some off-center turning to get the oval shape to the handle. I only discovered the limb defect near the base when I was well on my way and didn't want to start again. It's just a shop tool -- right?

I made the head from a bronze billet I bought from Enco. I mostly machined in with my Delta Midi lathe. Slow going but I got it done with an assortment of files and in part with one of Doug Thompson's skews used as a scraper. What an awesome tool. Thanks again Doug for making it. The 'button' is dogwood. It sits in a round mortise in the bronze head about 5/8" deep and 3/4" in diameter. The head weighs in at just 5 oz. and it's overall length is about 12". It works great!

Paul


img