Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

I need a new Drill Press

Posts

I need a new Drill Press

#1

I need a new Drill Press

Sawman

>I have and older Delta floor model drill press. The quill has become sloppy and I cannot see a way to really fix it. I have used the adjustment bolt but it is not satisfactory. I am thinking about a bench model so I can have a cabinet underneath. I want a fair heavy duty one as I do use it quite a bit. Any suggestions?

Re: I need a new Drill Press

#2

Re: I need a new Drill Press

Dominic in Buck's County PA

>

It sounds like you just need to do some overhauling.

I would go to OldWoodWorkingMachines (http://www.owwm.org/) and post the model number and describe the problem. They can tell you how to remove the quill and replace the bearings

OR you can do the overhaul and SELL this big old DP and use the proceeds to buy your new fancy schmancy one! :>)

See ya around,

Dominic

Re: I need a new Drill Press

#3

I Did Half That

George@Colonel's Workshop-Havertown PA

>Good Evening Dominic and Sawman,

DPs ain't cheap, and are certainly worth a few bucks worth of restoration work as a prelude to an upgraded replacement. I just got rid of my old one for more than I paid for it 11 years ago. Used that money towards a new radial. The nice thing was that the old one needed no repair work at all.

George

Re: I need a new Drill Press

#4

Re: I need a new Drill Press

Hank Knight

>I agree with Dom: you can rebuild your old one with some research and sweat and have a better machine than you can buy new for twice the money. If you want a bench model, your best bet is to look for an old one. I looked for a new, heavy duty bench model for several years and finally bought an old Walker Turner and rebuilt it. I'd do it again in a heartbeat. The old iron ones are great.

Hank

Re: I need a new Drill Press

#5

Re: I need a new Drill Press

Fred Davis

>Walker-Turners like old Olivers and Boice-Cranes were the Cadillacs of woodworking machines.

It's a shame they are know longer produced, instead we have Chinese,Taiwanese, Japanese clones of former great American products.

ain't it great?

FredD

Re: I need a new Drill Press

#6

Re: I need a new Drill Press

Barry Irby

>I agree with everyone suggesting you rebuild the one you have. If you realy want a bench top model, can't you cut off the column in the one you have? Seems a shame, but maybe you could.