Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Tuning a bandsaw

Posts

Tuning a bandsaw

#1

Tuning a bandsaw

ben d.

>There was and probably is an article on how to tune a bandsaw somewhere in the archives and I had read it before and now I cannot find it. Would someone help me out on this.

Thanks

ben d.

Re: Tuning a bandsaw

#2

There are also books, probably at your library

Bill Houghton, Sebastopol, CA

>Mark Duginske's book on bandsaws devotes a whole, long chapter to bandsaw tuning.

Re: Tuning a bandsaw

#3

Re: Tuning a bandsaw *LINK*

Bob Entwisle in NJ

>I found this link, but it may not be what you're looking for, it seems more about getting the wheels co-planar.


http://www.woodcentral.com/articles/powertools/articles_535.shtml

Re: Tuning a bandsaw

#4

Re: Tuning a bandsaw

ben d.

>Thanks Bob''

I had found that one but there is one here somewhere that went into detail and even about the set in the blade and how to take set out if one side of the blade had too much. Quite a detailed article so I will keep looking.

ben d.

Re: Tuning a bandsaw

#5

Re: Tuning a bandsaw

del schisler

>get this book Iturra design This is the best one around Call toll free 1-888-722-7078 or email KALL@comcast.net this is what i have unless he has change someting del

Re: Tuning a bandsaw

#6

Re: Tuning a bandsaw *LINK*

LennyB

>This might be the one you saw:


The Bandsaw