WE'VE MOVED TO A NEW SERVER
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

OT-New Sink Plumbing

Posts

OT-New Sink Plumbing

#1

OT-New Sink Plumbing

howard

>I just finished building a beatiful vanity with very nice veneers. I am re-doing a bathroom and want to change the location of the sink. To do this would mean the drain line running 4' and then turning a corner and running 2' to the soil stack. Can the drain line make a 90 degree trun, or is there another way to do this. Thanks for your help.

Re: OT-New Sink Plumbing

#2

Re: OT-New Sink Plumbing

Tom MacGregor

>Increasing the run 4' and adding a 90 shouldn't be much problem for a vanity, but if it does get clogged it could be hard to snake. I'd think about installing a T with a screw-in clean out instead of a 90, assuming it's cemented PVC that doesn't come apart.

Re: OT-New Sink Plumbing

#3

Re: OT-New Sink Plumbing

Justin Szeliga

>If you are running through the walls & not under the floor you should have plenty of slope available to keep things flowing. You can also go to 2" in the wall, but with a vanity sink it should not be necessary. 1/4" per foot, & you'll be fine.

Peace

Justin

Re: OT-New Sink Plumbing

#4

Re: OT-New Sink Plumbing

Ronald from NW Ohio------WebKitFormBoundaryAAghAA+

>It will be all right, but my advice is to use a street 90. Gives a little more bend than a regular 90 does.

Re: OT-New Sink Plumbing

#5

Also known as a "sweep" 90

Bill Houghton, Sebastopol, CA

>Our local building inspector insists on the largest sweep we can fit in the space for any drain line.

Another suggestion: if you've got the space, put a cleanout above the drain access.

Don't forget your vent stack.

Re: OT-New Sink Plumbing

#6

Thanks All........................................

howard

>First I am glad to know that this can be done otherwise my remodel plans would have to change. Thanks for the heads-up on the elbow which I will make sure to size properly. Thanks again for your help!