Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

makita LS1013

Posts

makita LS1013

#1

makita LS1013

Michael Helms

>I'm new here, hoping to find someone able to send/post a photo of the underside of their Makita LS1O13. I'm a recent victim of a burglary, lost my old, old, makita chop saw and bought a display model LS1013L at Home Depot to replace my stolen antique. The new saw was stripped of various small parts during its life on the rack so they sold it to me for $200.00 without them. I ordered all the items I could determine were gone from ToolBarn for about $80.00, but I've had no experience with this model, and I'm unsure I can assemble it correctly so that the slider lock works with just the exploded Makita diagram I downloaded for reference. I'm hoping I can persuade someone with one of these saws and a digital camera to photograph the underside of their saw and post or email a photo to me. Specifically, I'm interested in the "Lock Lever" (#152 in the parts diagram - it looks like the crank for starting an old model T you see in silent movies). I think this locks the rotation of the cut angle adjustment. I have a long coil spring that slips over its shaft, but don't know in exactly what manner/order. The inner knob/assembly (#180 in the parts diagram) that I believe locks the slider is also a bit of a mystery. It doesn't seem to function without the lever and its accompanying parts (or some other missing items?) in place. The blade was also lost, and due to my limited experience with sliding saws, I'm not sure how important it is to have a dedicated low-tooth-angle sliding saw blade. I guess these limit surface tear-out on the top of sliding cuts?

Thanks in advance for any help you can offer,

Mike

email: seekir at aloha dot net

Re: makita LS1013

#2

Try Makita

Mark Mandell - Gone Round In Jersey

>The link will take you to a complete parts diagram where you can see exactly what you may be missing. I think that site will also provide you with a downloadable manual

And yes, a quality blade made for this type of saw is critical to good and SAFE cuts. I use an LS12-11 and the quality of the cuts improved dramatically when I switched to a full-kerf blade with the right geometry for what I was doing.

Re: makita LS1013

#3

Opps  *LINK*

Mark Mandell - Gone Round In Jersey

>


Parts!

Re: makita LS1013

#4

Re: Opps

Michael Helms

>Yeah, I've already got the exploded parts diagram. It doesn't really clarify the assembly procedure for me or reveal where the torsion spring goes in relation to the rim of the base. Thanks anyway, Mike.

Re: makita LS1013

#5

Suggestion

Mark Mandell - Gone Round In Jersey

>My experience with the company is that they were fairly responsive to questions. I think there's a toll-free number on their site for support. Worth a try.

Re: makita LS1013

#6

Re: Suggestion

Michael Helms

>Thanks Mark.

Re: makita LS1013

#7

Re: makita LS1013

Paul Mosteller ( Springfield, VA)

>Hi Mike,

I have an LS1013. I'll send you some pictures.

Paul