Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Triton Router Problems

Posts

Triton Router Problems

#1

Triton Router Problems

Jim Engel

>I have the Triton 2 1/4 HP plunge router for use

in a router table.

While I like the features, especially the ability

to change the bit from above and the raise / lower

crank from above, it has not turned out to be too

reliable.

Now the gears that drive the lift mechanism from

above the table seem to be slipping, and it does

not look too easy to take it apart.

Has anybody else had experience with this unit ?

Is it worth sending out for repair ?

Other suggestions for a similar but more rugged

deticated medium duty table router ?

Re: Triton Router Problems

#2

Re: Triton Router Problems

Ed Mulligan, Cape Cod

>I noticed that same problem with my Triton when I put it in the router table. I have to support the router weight from underneath, in other words push up, and then the height adjustment works. I think there's a friction clutch somewhere in the drive train that needs a little help working against the router's weight. I say that because the height adjuster screw works fine in the upright position.

Re: Triton Router Problems

#3

Re: Triton Router Problems

Jerry Gibbs

>call the Triton service people. I had a problem with my 3-1/4 out of warranty plunge router. I was promptly sent new gears for the adjustment mechanism gratis. Jerry Gibbs

Re: Triton Router Problems

#4

Re: Triton Router Problems

Jim Engel

>Thanks for the tips !