Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

panel doors

Posts

panel doors

#1

panel doors

Kurt in Minnesota

>I have not made panel doors in a while and I have to make a face frame and doors for a customer, what is the width of the style and rails on a panel door?

TIA

Kurt

Re: panel doors

#2

Re: panel doors

Paul Leuba - Hunt Valley, MD

>In my work, I try to size the rails and stiles proportionate to the size of the overall door, with the stiles and top rail equal in the range of 2" to 2 3/8" and the bottom rail in the range of 2 1/2" to 3".

If the doors will be paired on a two door cabinet, it can be pleasing to the eye to make the two center stiles a bit narrower than the outside stiles so that the doors do not seem imbalanced with a disproportionately large double stile running down the center of the two door pair.

Re: panel doors

#3

Re: panel doors

Pete in Holland, MI

>I typically make my rails & stiles at 2.25" width, but often leave the bottom piece a half inch wider for visual and strength reasons.