Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

OT- 1x1 mesh tile backsplash - notch or V trowel?

Posts

OT- 1x1 mesh tile backsplash - notch or V trowel?

#1

OT- 1x1 mesh tile backsplash - notch or V trowel?

Steve Silca

>I'm installing a 1x1 mesh tile (12" squares) this evening and wondering if you would recommend using a 1/4" x 1/4" notched trowel to allow myself a little more play in the installation, or a V-notch trowel to avoid the mortar leaking through the grout lines.

Any advice/testimonials appreciated!

SS

Re: OT- 1x1 mesh tile backsplash - notch or V trowel?

#2

Re: OT- 1x1 mesh tile backsplash - notch or V trow

Jon Weisenbach

>Probably the v-notch will do the trick just fine. I assume your using mastic rather than thin set but either system will work with the v-notch.

Jon

Re: OT- 1x1 mesh tile backsplash - notch or V trowel?

#3

Re: OT- 1x1 mesh tile backsplash - notch or V trow

Jon Weisenbach

>Should have added the square notch would probably tend to leave too much adhesive as apposed to the v-notch.

Jon