Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Securing glass in thin frame doors?

Posts

Securing glass in thin frame doors?

#1

Securing glass in thin frame doors?

bobby bauer

>I'm trying to come up with a way to make small doors, about 5"x8" overall, with a glass insert about 4"x7". I want the door frames to be about 3/8" thick and I can't come up with a nice way to secure the glass. In the past I've used rubber glass holder pushed into a groove but these doors are to thin.

Any ideas?

Thanks

Bobby

Re: Securing glass in thin frame doors?

#2

Re: Securing glass in thin frame doors?

Lee Schierer - McKean, PA

>Small dabs of silicone sealant in each corner of the frame will hold the glass securely.

Lee

Re: Securing glass in thin frame doors?

#3

Re: Securing glass in thin frame doors?

bobby bauer

>I though of using silicone sealant but not sure I like the look.

Bobby

Re: Securing glass in thin frame doors?

#4

Here's a way to do it...

Ellis Walentine, Host

>Make your frame members with grooves for the glass. Then assemble them around the actual pane of glass and screw the stiles to the endgrain of the rails with some attractive screws. (I like trim heads.) If the glass ever breaks, you remove the screws and replace it.

This is a neat solution because the glass itself serves as the structure of the door. The "stiles and rails" are really just applied borders or edging. You can tune the door for square by putting tiny shims in the grooves where necessary.

Ellis Walentine, Host

Re: Securing glass in thin frame doors?

#5

Re: Here's a way to do it...

Pete in Holland, MI

>I second the RTV silicone. Have done it several times. You only see it when the doors are open. Just do a good job of laying down a bead. Also prevents rattling glass.

You could also "tack" the glass in place with silicone, then cut small strips of wood as trim and silicone them in place. No nails. No risk.

Re: Securing glass in thin frame doors?

#6

An example

Ellis Walentine, Host

>This is an ebony-framed glass door about 18" x 36". The stiles are round and screwed to the rails.

Ellis


img

Re: Securing glass in thin frame doors?

#7

Re: Securing glass in thin frame doors?

Doug Reynolds in Seattle

>My glass company says they use silicon as well. It allows you to just cut the silicon to remove the broken glass. I wonder if you used tinted silicon would have a difference presentation you would like?

Re: Securing glass in thin frame doors?

#8

Wow, that's an interesting design, Ellis

Bill Houghton, Sebastopol, CA

>Can we see pics of the whole cabinet?

Re: Securing glass in thin frame doors?

#9

Such as it is

Ellis Walentine, Host

>This whole cabinet was an exercise in non-traditional joinery. The birdseye top and bottom panels are joined to the ebony uprights with trim-head screws. The door is constructed as I explained earlier and is hinged to the top and bottom panels with screws and shim washers to keep things flowing smoothly. There are tiny bullet catches top and bottom on the closing stile to hold the door shut. The back panel is bronze mirror and the shelves are 1/4" plate glass supported by rubber-coated studs in the corner posts.

I actually wrote an article about this cabinet in an issue of American Woodworker in the early '90s. It's filled with some pretty interesting memorabilia, including work by Ian Kirby, Frank Klausz, Steve Blenk, Stuart Mortimer, 'Hannes Michelson, Bill McCarthy, David Ellsworth, Makoto Imai, Jennifer Shirley and others.

Ellis



Re: Securing glass in thin frame doors?

#10

Re: Here's a way to do it...

bobby

>Use the silicone to attach wood strips. That will clean up the look.

I also am going to explore the idea of screwing the rails to the stiles.

Thanks

Bobby