ABRAMS ready for action . . .
steve mackay
>Took more reverse engineering that I'd have thought. Hope the CAV Boys "pony up" for them. ( Pun intended ! )
Knowledge You Can Build On — Est. 1998
ABRAMS ready for action . . .
steve mackay
>Took more reverse engineering that I'd have thought. Hope the CAV Boys "pony up" for them. ( Pun intended ! )
Re: ABRAMS ready for action . . .
steve mackay
>
Re: ABRAMS ready for action . . .
doug f, san clemente, ca
>Steve - that is incredibly impressive on so many levels.
Do you have any pictures of your process? Are you going to add color? Wood?
Masterful craftsmanship.
Doug
Need better pictures
Ellis Walentine, Host
>Steve, your work is superb from what we can see. I think you owe it some better photos. Maybe you can find some progress shots and a few paragraphs about the construction process and we'll make a Shop Shot out of it.
Nice.
Ellis
Re: ABRAMS ready for action . . .
GalenV in Iowa
>Steve
What wonderful detail. From your earlier post I thought the tracks and dolleys looked great. The early turret picture I had no idea you were headed to this much detail.
I sure would not add any paint as everyone should see that it is made of wood. Only paint would be of the smallest detail areas if it would help show.
Would be great if you could somehow post a larger picture.
How much time did you put in? Maybe you do not want to figure!
Again fantastic job!
Galen
Re: ABRAMS ready for action . . .
George@Colonel's Workshop-Havertown PA
>Good Afternoon Steve,
I've built a few, far less complicated, models. I have an idea of the painstaking care and craftsmanship which went into your Abrams. Agree with Ellis. It would make a great Shop Shot. And, I personally would like to see the details in a larger subsequent pix. Wonderful job. I like the base also. Its sets the tank off very well.
George
Re: Need better pictures
david schaefer fairbanks ak
>thanks Ellis that is a neat post that needs to be preserved.
? . . .
steve mackay
>Do we e-mail some sort of narrative then attatch images ?
With full size photos.
JL
>Don't you look at Shop Shots? You can get some interesting ideas.
Re: ? . . .
Dan Donaldson
>You can put as much or as little as you need for text. If you are a good writer, then by all means write it up as you would like it to be. If you want a bit of help, then just get the thoughts down with the pics and the elves will help fix it up for you. Make the pictures as big as possible. It is much easier to cut them down to whatever size is needed than to try to make them bigger. You can do a Word document, or just do a text doc, letting us know which picture is which.
Re: ABRAMS ready for action . . .
Randy in Iowa
>This is the neatest thing that I have seen in a good long time.
Randy
Re: Norm must be inside :-)
Brian in Brighton
>
Your call
David Yoho
>Steve, the easiest for me is your narrative about the project either written in your email program, in a text file (Windows Notepad), or a MS Word document. The only thing I ask if you use Word is please don't embed (insert) your images with it - send them separate.
Don't fret about not being a writer (should you feel that way). Just write about your project as clearly as you can as if you were talking about it. Nobody will see it but me and they'll never know whether you misspelled something or wrote it in all caps. I'll polish it up for you should it need it.
The larger your images, the better. One great help to me would be if you could include the image file name in the part that talks about that image. Otherwise, I'll do my best to arrange things the way I think they belong (actually, this is most of the time here).
Should you have any other questions, feel free to email me directly.
David Yoho
Shop Shots Editor
High praise . . .
steve mackay
>from this esteemed community ! Many thanks. While I'm not a "fine woodworker" I've found folks like and are willing to "pony up". I've always done Air Defense equipment for the crowd here at Fort Bliss but The CAV is moving back with a vengence. Soooooooooooooooo play to your audience. What might be the strangest part is that yes, Ol' Norm IS inside ! Even though he uses his high-speed, big machines the methods and tricks are, pretty much, the same. Just scaled down a bit.I've NEVER watched Da' Guy and NOT picked up something usefull.
Out in the west Texas town of El Paso....
Mac in Indy
>Steve,
How is good old Ft. Bliss these days? I lived out there, just off Lee Trevino Blvd, for a year back in 1986. I was part of the civilian fielding team that supported the deployment of the M1 to the 3rd Armored Cav. I really enjoyed my time out there! From what I can see you did a great job on the model. It is an M1A2 as best I can see from the pix. That is the latest version built, well at least that I'm aware of! I was transfered from the military side of Allison Transmission to the Hybrid side. It's been 6 years so I may be a little behind on the latest info!
Good luck!
Mac
Re: Out in the west Texas town of El Paso....
steve mackay
>Well, the CAV is moving back in with a vengence ! They REALLY hated Colorado with the Greenies restricting their "play time". They're like a bunch of big dogs. They gotta have a couple thousand acres to tear around in. Building their own city from Biggs all the way out to McGregor base camp !