Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Jorgensen clamp is stuck

Posts

Jorgensen clamp is stuck

#1

Jorgensen clamp is stuck

Joe in a Cleveland suburb

>Hi all.

I remember reading about this problem several years ago and thinking I was lucky since it never happened to me. Well, tonight I went to clamp up a project and discovered one of my Jorgensen Cabinet Master clamps is stuck closed.

It's loose but the jaws won't separate. It's stuck shut. Anybody remember what to do when these are like this?

Thanks.

Joe

Re: Jorgensen clamp is stuck

#2

Dale Lenz

Re: Jorgensen clamp is stuck

Dale Lenz

>Try lifting the screw handle up and down while pulling back. Maybe a lite tap with a rubber mallet on the moving jaw. Good luck

Re: Jorgensen clamp is stuck

#3

Got it! Thanks Dale!

Joe in a Cleveland suburb

>

Re: Jorgensen clamp is stuck

#4

Re: Jorgensen clamp is stuck

Bill White

>Hey Joe....Remember, when in doubt, FORCE IT!!!

Bill

Re: Jorgensen clamp is stuck

#5

Re: Jorgensen clamp is stuck

A Wright

>I emailed Jorgensen a couple of years ago because this had happened to me a couple of times and they sent me a free envelope of plasctic spacers which prevent the clamps from sticking.

Re: Jorgensen clamp is stuck

#6

Dale Lenz

Re: I keep...

Dale Lenz

>telling my wife, I'm good for something! Glad I could assist.