Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

finish tambour door before or after assembly

Posts

finish tambour door before or after assembly

#1

finish tambour door before or after assembly

Kurt Rosecrans

>I am building my first set of tambour doors. The slats will be painted. Do I paint the slats before assembly or after assembly? If I paint before assembly, could the paint bind in the dado making the door difficult to operate? If I paint after assembly, would the paint interfere with the flexibility of the canvas backing? When do any of you who have built tambour doors do the finishing?

Re: finish tambour door before or after assembly

#2

Re: finish tambour door before or after assembly

Fred Davis

>When I have done done tambour doors including making the slats, they were finished after assembly and before installing.

Since this was done with stain and lacquer, there was not a problem with bonding of the slats to anything but their backing.

However, your painting and I believe I would do this before the installing also and tape the ends so paint does not get on them.

Never having painted the Tambour , it would seem to me that paint could bind then and when they were forced opened or shut , it might crack the paint.

In any event , the ends should be waxed bare wood to run in the groove smoothly. No paint in the grooves either. ;-))

FredD

FredD

Re: finish tambour door before or after assembly

#3

Paint 'em first

Ellis Walentine, Host

>That'll give you a chance to knock off any drips or raggedy edges prior to gluing your backing on.

Ellis