Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Biesemeyer splitter question

Posts

Biesemeyer splitter question

#1

Biesemeyer splitter question

David Sparks

>I have a Powermatic model 66 with a removable Biesemeyer splitter. I saw a drawing once of a tool someone made to pull the little round knob on the splitter so it can be removed and replaced without having to remove the throat plate, but I don't know where I saw the drawing. Have any of you guys made such a tool? I'll appreciate any ideas. Thanks!

Re: Biesemeyer splitter question

#2

My solution

Stephen Roth

>I had the same problem with the splitter and the PM66. Then one day I just opened up the thing and took out the ball and spring action pin. Now the splitter goes in and out (one handed), without removing the plate. The fit is still tight and I have never had it come out. The way it is positioned, I can't see a kickback pulling it out either.

Re: Biesemeyer splitter question

#3

Re: My solution

Ralph Turney in Huntington Beach, CA

>I'm in the same situation...I might try your solution, thanks!

Re: Biesemeyer splitter question

#4

Re: My solution

David Sparks

>Thanks Stephen. I ended up making a hook tool from a piece of coat hanger that works okay. Your idea would be more convenient though. I may try it.

Re: Biesemeyer splitter question

#5

Re: Biesemeyer splitter question

James Watriss

>I'm sure you could run a rod straight out from there, and straight out through the side of the cabinet. After that, a simple lever handle mounted under the left hand wing would do it for you.

Re: Biesemeyer splitter question

#6

Re: Biesemeyer splitter question

Steve Schoene

>What happens when you tilt the blade? Think about the geometry of that.