Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

"Stapling" a rope rug together *LINK*

Posts

"Stapling" a rope rug together *LINK*

#1

"Stapling" a rope rug together *LINK*

Tom Dunlap

>My work as an arborist leaves me [ooo, I just saw the bad pun...groannn :)] with lots of rope that can't be used for climbing or rigging. One use that I've thought about is to make rope rugs. There are plenty of patterns for woven rugs but I want to make flat coiled rugs first.

Painting on an adhesive to the back is one way to hold the rug together I know. But that leaves only a one faced rug.

I'm trying to find some sort of staple type fastener that could be stuck through the ropes to hold the coils together but not be on the surface. One idea was to use a tagging gun. When I looked at them I found that the nylon 'strings' didn't pull tight. Having a tool that injects the fastener and then snugs it up like with the nylon wire bundlers is what I'm looking for.

If I can find the tool I do have some ideas for rugs that would incorporate wood pieces into the rug.

Another thought was to use hog-ring staples to pinch the ropes together. Again, a one sided rug with metal staples to scratch floors.

Using a heavy soldering iron to melt or tack adjoining wraps may work but I don't like the idea of all that melted rope smoke even with good ventilation.

Stitching with heavy thread does work but is time consuming. I've done plenty of whipping and siezing on these ropes using a sailor's palm...not a lot of fun.

Does anyone know of a stapler or binder that might work?

Thanks!


tag gun

Re: "Stapling" a rope rug together *LINK*

#2

Re: "Stapling" a rope rug together

John K Jordan

>Tom, sorry I don't have an idea for you (my mother used the stitching method) but thanks for the possible source for pieces of rope. Even relatively short pieces are always useful around the farm. I'm going look for local arborists in the phone book.

JKJ

Re: "Stapling" a rope rug together *LINK*

#3

Re: "Stapling" a rope rug together

Tom Dunlap

>John,

Be careful of what you expect the rope to do for you. Arbos are hard on their ropes. When I retire ropes they usually get cut into six foot sections to keep them from becoming a danger.

Ropes are like paper clips. If they're bent gently they have a long life. but...you're not going to know if the rope was hammered before you got it.

A visual inspection will do a lot...but no one knows what is going on inside without doing destructive testing.

Where do you live, I bet I know someone who you could contact.

Re: "Stapling" a rope rug together *LINK*

#4

Re: "Stapling" a rope rug together

Al Stokka - Cambridge, Iowa

>Tom,

Would hot-melt glue be a viable option?

Al

Re: "Stapling" a rope rug together *LINK*

#5

No Tom, A Very Good Pun!

George@Colonel's Workshop-Havertown PA

>

Re: "Stapling" a rope rug together *LINK*

#6

are there any bad ones Colonel?

Tom Sontag - St. Louis

>

Re: "Stapling" a rope rug together *LINK*

#7

arborist's and rope

John K Jordan

>Tom,

I live in East Tennessee, somewhat north of Knoxville. I would love to find a trustworthy local arborist, one who cares about trees as well as making a living. I have many trees I'd like advice on and several that need attention. For example, this farmland has a number of oriental pear trees (several varieties) that have been neglected and overtaken by woods for so many decades they have grown very tall reaching for the light. I'd like to know if they can be cut back to a reasonable height without stressing them too much. I'd pay for some pruning advice too. I spent an hour pruning one beautiful pear today after I had cleared out some big shading trees so it can finally get some light. I have tree-care books but there's nothing like a real live expert.

Many uses we have for rope don't need much strength and short pieces work fine - tying up buckets, tying a goat while trimming hooves, securing the top of a ladder, keeping fuel cans from sliding around in the truck, etc. I have a couple of 200' lengths of heavy new manila rope I use for tension when taking down trees. I never climb.

JKJ

Re: "Stapling" a rope rug together *LINK*

#8

Not hot melt

Tom Dunlap

>I tried hot melt but it cracked and fell apart after flexing a few times. IN the cold I imagine it would crumble too.

Re: "Stapling" a rope rug together *LINK*

#9

Seems like the problem with glues

Bill Houghton, Sebastopol, CA

>is that, unless you had one with high penetration, you'd be gluing to the "hairs" on the rope, not to its structure.

Re: "Stapling" a rope rug together *LINK*

#10

Re: Seems like the problem with glues

Tom Dunlap

>Exactly!

Finding an adhesive that is viscous enough to get into the rope rather than just on the surface. What I saw with hot glue was that the rope was such a heat sink that no matter how hot the glue was it would cool before it would flow into the rope.

I've got some exterior carpet adhesive that should work. The question will be...is it going to skin and not remain tacky? And, will it have a bit of stick to it so that the rug doesn't move around and become a hazard.

Re: "Stapling" a rope rug together *LINK*

#11

Dale Lenz

Re: "Stapling" a rope rug together *LINK*

Dale Lenz

>Tom,

Might check out the "google" link below. Good luck


Rope Rugs

Re: "Stapling" a rope rug together *LINK*

#12

:)~~ 10,400,000 hits!

Tom Dunlap

>HI Dale,

Hahaha! That's where my search started. AFter trying all sorts of modifiers to the search I kept coming up empty. When I don't know the language to use I'm lost.

The ropes that I have to use would fill a five gallon bucket and some, to overflowing. Weaving a gob of rope like that is a daunting task.

Using an old, heavy duty, soldering iron to melt/tack the ropes together may be my easiest solution.

Thanks!

Re: "Stapling" a rope rug together *LINK*

#13

Re: :)~~ 10,400,000 hits!

Fred Davis

>Tom,

I know yu said you wanted a flat coil rug , but given the hassle , why not weave the rope , kinda like a doormat, sounds like good material for one.

FredD