Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

need start switch for DC motor

Posts

need start switch for DC motor

#1

need start switch for DC motor

Phil Joines in Krum, Tx

>I find it strange that Delta puts the starter switch outside the enclosure of some of the 1 1/2HP dust collector motors, right where the dust will be blown into them. Be that as it may, we have several at work with burned contacts.

Delta doesn't show the switch in their parts list. (They will sell the complete motor :<) The last repair shop in town closed several years ago and I need to find an online source. Any sugestions?

Re: need start switch for DC motor

#2

Re: need start switch for DC motor

jerry mayfield

>Who made the starter ? Allen Bradley,Furnas. This is the place to start Delta doesn't make starters. Either buy or adapt an enclosure if you think its a better design.

Regards

Jerry

Re: need start switch for DC motor

#3

Re: need start switch for DC motor *LINK*

GalenV in Iowa

>I have been looking at the Delta 50-720 1 HP and 50-850 1 1/2 HP and both of these units have a parts drawing and parts prices on the web site I was using. Maybe this is not what you are looking for?

Normally I too look at the part and see if I can identify the original manufacture and at least look at the price to buy direct or alternate supplier.

Galen


http://www.dewaltservicenet.com/Products/DocumentView.aspx?productid=43632&typeId=10645&documentId=29990

Re: need start switch for DC motor

#4

Re: need start switch for DC motor

Ralph Lipeles

>Is there any way to get the switch apart and clean the contacts? I have had reasonable success in doing that type of thing.

Re: need start switch for DC motor

#5

That's it but the drawing

Phil Joines in Krum, Tx

>doesn't show the switch. It's under the outside bell housing. I called Delta today. They have the switch - for $55. I think it's worth about $15. Will look for another source.

Re: need start switch for DC motor

#6

Re: need start switch for DC motor

Phil Joines in Krum, Tx

>I have done that to get it running again. Because the switches arc a lot from the dust they get deeply pitted and the burnishing only lasts a few months.

Re: need start switch for DC motor

#7

Re: need start switch for DC motor

Phil Joines in Krum, Tx

>It's a 1-1/2HP motor so it doesn't have a "starter" just the centrifical (sp?) switch for the winding.

Re: need start switch for DC motor

#8

Re: need start switch for DC motor

wayne in Topanga

>Phil,

If you are getting that much dust through the bags you need to try the felt bags. They will do a much better job for the switch and your lungs.

Wayne