Drum sander identification *LINK*
Nathan
>Anyone familiar with this model of drum sander? If so, would you recommend it? It has a separate motor that runs the belt that pulls the material through. Thanks.
Mystery Drum Sander
Knowledge You Can Build On — Est. 1998
Drum sander identification *LINK*
Nathan
>Anyone familiar with this model of drum sander? If so, would you recommend it? It has a separate motor that runs the belt that pulls the material through. Thanks.
Mystery Drum Sander
Re: Drum sander identification
Phil Joines in Krum, Tx
>The upright casting looks a lot like our Performax/Jet but the frame for the conveyer doesn't.
My take on these
McKay
>As a disclaimer, I admit to being used to commercial grade wide belts. With that being said, I purchased a 22/44 Jet last month and absolutely hate the thing. The oscillator causes waves in the board. The deflection on the outboard side is unacceptable. And the surface sanding is also unacceptable.
Looks a lot like... *LINK*
Ellis Walentine, Host
>...this one on the Steel City site. It isn't, of course, but there seems to be a lot of copying that goes on in machine world. Odds are the one you found on that Czech site runs on 50Hz current.