We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Howdy y'all. I'm wondering how those of you who own drum sanders buy/make your sandpaper. I searched the archives and didn't find much. I just recently bought a Jet 10-20 and want to learn from your experiences.
>I recently posted on the topic of sand paper for a Performax. Try looking under my Name about a couple of months ago.
Found sources for sand paper at Klingspor (a sponsor here) and Industrial Abrasives. Klingspor has a good reputation here and so does IA. Locally I pay about $7 to 8 for a strip for my 16/32. Klingspor was about $4.50 if I cut them myself from long rolls and IA was about $3. I will be ordering from IA. At that price I can afford to treat the strips as disposables and quit dogging them to death and beyond. Once you get into it, making your own only takes a couple of minutes.
>Ditto what Barry said. I, too, get my paper from Industrial Abrasives. It comes in 50 yd rolls in the width your particular machine takes and also in the individual grit you desire. I find I only use one grit most of the time (120). You just use one of the original strips that came with your machine as a template. It takes only a few minutes to unroll, cut and put on machine. Much, much cheaper than buyin the indivual rolls.
>I have the Performax version of the same sander. I don't recall where I got my paper, but it might have been IA. Anyhow, making your own is very easy. I used the one piece that came with the sander as a template. You don't need to be very exact on those ending slanted portions. IMO, it's a no-brainer to get rolls and cut your own.