Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E. Peacock

>2 Feb 2009

Good Morning

I hope everyone is ok now that the ice storms have passed and many have started warming up with the ice going away. We were fortunate to be on the "line" of where the bad weather was and just some of the wintry stuff hit us, but north of me is where many could be without power until the middle of this month. My prayers have been for all those that have had to survive and make do until they can get power and utilities restored to their homes.

It's been mostly work at the day job since last week and all I will say is that I'm very thankful to have a job as some near me no longer have a steady paycheck. I wish and pray for all who have lost their method of income and I hope the best for everyone. If I could fix the problem with our world, I sure would.

The weather is nice here today and the humidity is lower than last week, so today I get to spray more finish on the kitchen table without the finish "blushing" on me. I am hoping for delivery of the table next week. YEA!!!

Cooler temps today from the 65 degrees F we had here yesterday. I played bass at church yesterday and have rehearsal tonight for next Sunday.

So what did YOU do this weekend???

My last comment is: What a game that was played last night in the SuperBowl.!!!! Congrats to the Steelers!!!

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Mike Fitterling

>Thought I would be finishing up the addition this weekend so I could call for final inspection this week. We got everything done, except for the screws every 12" in the field of the metal roofing (I had attached the panels only at the ridges, eaves and tops). Only 6/12 pitch and never had a problem walking up there, but no matter what I did on Sunday, I kept sliding. I even went out and bought some shoes with softer soles and still could not hold. Finally, I took the shoes off compeletely and could (barely) stand up there. I had one panel done before, so I got another done Sunday and a few rows of a third while barefooted by the time I had to quite yesterday. Disappointing, and today we have rain, so I can't work up there.

Weekend work did also involve woodworking. I made a louvered access hatch for the crawlspace out of cypress, mainly on the RAS, and got some more cypress milled and installed in the main entryway into the new part of the house.

Re: WC Weekend Accomplishments....

#3

Buried a Buddy.

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis, and Happy Monday

It was a weekend of mixed emotions for me. An old soldier in our Vets group succombed to cancer and was buried on Saturday at age 84. Gene had lost his right leg in Okinawa, so was a real hero. I had other things happen, but don't feel much like talking about them. Have a great week.

George

Re: WC Weekend Accomplishments....

#4

Re: Buried a Buddy.

Dennis E. Peacock

>I'm so sorry to hear about that Colonel. Please accept my most sincere condolences. Thoughts and prayers for the family and friends.

Dennis

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Jay St. Peter - Southern, MD

>Got a little shop time this weekend. I finished the form for my bent lamination coat rack project. Then I took a detour and cleaned the shop and waxed my cast iron. I had a little rust forming on the jointer from my ceiling leak a few weeks ago. Hopefully I'll get the main glueup done next week.

Jay

Re: WC Weekend Accomplishments....

#6

Re: WC Weekend Accomplishments....

Clint Searl, at the base of Haycock Mtn

>Took delivery on a desk made by Nakashima's grandson, Ru Amagasu.

Clint


img

Re: WC Weekend Accomplishments....

#7

I retired

Terry Quiram

>As of 1 Feb I am now retired. I am looking forward to more time in the shop turning.

Re: WC Weekend Accomplishments....

#8

Re: I retired

mdclor

>Congratulations!!!!! May you enjoy many years at the lathe.

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments....

Robby Wright

>Had to work in my shorts as we were having a mini heat wave..8-p Sorry some of you are having heavy weather issues.

I made some progress in getting my shop organized and back up to usable state. I got two cabinets I have been building in place. The first is a rolling floor cabinet 36 inches high and will hold my routers, bits and such, sanding supplies, overflow measuring equipment and all those manuals that accumulate from all your equipment that you need the moment you throw them away. My disk sander is mounted on top.

The second cabinet is also on wheels, but it a 6 foot tall power tool and supplies cabinet. The top half has cubbys for power and pnuematic tools. The bottom half has drawers for screws and hardware and a few more cubbys for drawer slids and such. I replaces a shelf unit I made when we first moved here.

Next up is redoing my workbench and mounting a new vise.

I got to help my son with some of his projects - He just started the Palomar college woodworking program. Should be fun - They have a really good program. I think I am a bit jealous.

Robby W. in San Marcos, CA