We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>My local Rockler store has a 14 in. Jet 710115k bandsaw for $500 reg $750 today. Never owned a Jet product, are they any good? Been using a workbench bandsaw. Thought about moving up to a bigger one. Trying to justify spending the money for something I don't use a lot.
>Jet machinery is as good as any out there. I've had one of their cabinet saws for a number of years now that I will never replace. I haven't looked at the particular model bandsaw in your post but it is probably equal to the same Delta offering. Easy to get parts and blades for, too. Nothing wrong with Jet but remember all manufacturers have their lemons!
>It sounds like a pretty good deal. I have a JET 14" and it's been a good saw, I had an issue with it after leaveing the tension on a 3/4" blade over the winter, since that time they have beefed the part up, but if it comes with a quick release you shouldn't have any problems. Looks like a nice saw and should have enough power if you ever want to do some resawing.
>Jet has an offer going through April 30, giving 'free' tools with some purchases. If you spend $500, they will give you two 50" parallel clamps. If you are going to buy the saw anyhow, this just makes the deal sweeter.
(I saw the info on Woodcraft's site, but it is a Jet deal, so I'm assuming Rockler will know about it also.)
>I own a Jet jointer, air filtration unit and a bunch of their parallel clamps. All were manufactured to very high standards IMO and each has performed as well as or better than expected. I certainly wouldn't hesitate to consider any Jet tool for future tool purchases.
>I have a Jet 14" bandsaw that is the third major tool I bought when I was starting to put a shop together. The only negative I can find is that the dust collection leaves a lot to be desired. That said, I don't think it's any worse than other saws in the same class.
I added a few extras to mine like a quick tension release (I think the saw comes with that now) and a riser block. If you have been doing everything with a benchtop saw the riser block probably isin't that important. For cutting out bowl blanks it's a must.
My #3 son is using my first 14" Jet bandsaw, which I sold him after running it for 10 years of trouble free service. My newer one came equipped with a riser block, mobile base and Jet fence. Its a great saw within its design limitations, is accurate, plenty of power. I'd buy another in a heartbeat. Its a tool I use heavily, and I am completely satisfied with both my saws.
>Just for giggles while we are on the subject of this bandsaw. I wanted a little taller fence for mine, so one day I was brain stormin. I have a bunch of brackets that I bought when working at the hardware store, so I dug them out and did a little tinkerin and this is what I came up with. What do you think ? Another thing I should mention, while I was working on it I decided that maybe the aluminun fence and new addition could use a good buffin with the buffing wheel on the grinder. Ain't she pretty ? lol