Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

OT Drywall Question

Posts

OT Drywall Question

#1

OT Drywall Question

howard

>I am extending a room and one corner will be at a 45 degree angle. What's the common practice for supporting the drywall where it meets at the outside corners, since the 2 x 4 studs will be in line with each wall. Do I need to rip a separate piece to fit between the end studs where the walls meet?? Thanks for the help.

Re: OT Drywall Question

#2

Re: OT Drywall Question

Barry Irby

>That's the "normal" way. Rip a stud to the angle and stand it in the corner. Probably needs to be nailed to another stud for strength.

Re: OT Drywall Question

#3

Yep.

John E in SC

>My house has a BUNCH of 45 degree walls. The framers ripped 2x4's to fit the corners for MOST of them before they left, but when the drywallers came in, I discovered they had missed a few. Ended up doing those myself (much easier than getting the framers to come back for 10 minutes of work). You've got to have something to support those corners, or one bump and it'll break the sheetrock.

John

Re: OT Drywall Question

#4

Re: OT Drywall Question

Fred Davis

>That is a ideal place to have your drywall guy radius the corner, ask him about it, much nicer look and a sturdier corner.

FredD

Re: OT Drywall Question

#5

Re: OT Drywall Question

George Koch

>Fred, with the radius corner, how do you handle the baseboard, chair rail, crownmold, etc? George

Re: OT Drywall Question

#6

Re: OT Drywall Question

Fred Davis

>Piece of cake George, we did radius corners far more often then square ones and for the base and chair rail you go around the radius using 22 1/2 degree mitre cuts rather then 45's.

This leaves a very small gap that is easily caulked for paint grade and left up the painter for stain grade.

For base the small piece will be about 7/8ths long , joined to the base on either side with glue and a brad.

FredD

Re: OT Drywall Question

#7

Thanks for the advice.....

howard

>I will rip additional framing to provide support for the drywall corners.

Re: OT Drywall Question

#8

Re: OT Drywall Question

John in Calgary

>In our house for the 90 degree corners, the trim carpenters installed premade round corner mouldings on each corner, however our trim carpenters did a pretty shoddy job of these and the transition from straight moulding to round corner moulding looks awful.

A friend's house had all the 90 degree corners installed with a short straight length of trim at 45 to wrap the corner.

John

Re: OT Drywall Question

#9

Re: OT Drywall Question

Fred Davis

>John,

I hate it when a so called carpenter gets near inside trim.

Your radius corners are considered a upgrade in drywall and the trim carpenter should have no trouble whatsoever going around the corners with 22 1/2 degree mitres.

If they can't redo it to your satisfaction , don't pay them and suggest that they find a different way to make a living.

FredD

Re: OT Drywall Question

#10

Re: OT Drywall Question

John in Calgary

>I don't disagree with you, however its never as simple as it first appears.

While the drywall corners may appear to be a custom upgrade in your market, the builder model we had under construction was not considered custom at the time, but a standard model which included the rounded drywall corners. If I had the option of forcing the trim carpenters to redo it by not paying them, I would have, but they were a sub to the builder not to us, so I would have had to force the builder to redo the trim on a stock plan that they were building 50 of that year (out of 1000 houses). The builder's post-move in service guys tried to make it look better, but it still doesn't look that great.

Nice in theory to withhold payment, much more difficult when you have sold your house and moved into an apartment with your 1 year old daughter and 7 month pregnant wife while you wait for your house to be finished. Its all seven years ago and I tell everyone I know about my experiences with this particular builder (there was more good than bad, but I do tell both sides), but its water under the bridge for me. The intent of my post was to caution the use of the pre-molded round corners found at the big box stores (at least in my town), and one day I will get around to replacing all the trim on our main floor the right way.

John

Re: OT Drywall Question

#11

Re: OT Drywall Question

Fred Davis

>JOhn,

radius corners need no caution , they are more attractive and durable then square corners.

What needs to be addressed apparently where you live is the lack of skilled trim Carpenters. Not a problem to ask the Carpenter after one badly done corner if that is the best he can do and if so , replace him.

Since you were the customer , you have the right to complain about shoddy work regardless of how many units the builder is doing.

What you got for your lack of follow up was the standard builder practice of having Warranty Service people try to fix a problem they are not skilled at, after the fact and smooth your feathers.

Residential construction was my life for many years and I was personally repsonsible for the construction by contract or job Supt. of at least 3,200 living units of every description and what your telling is pretty much the state of affairs in building practices , with the exception of the few good Merchant builders left in the country.

Complaining to Consumer affairs depts and or contractor boards after the fact rarely give you a feeling of satisfaction, however witholding payment until your reasonably satisfied is still the best and sometimes only way to remedy situations like you described.

best of luck with your base, let me know and I will post you a sample of how one is done.

FredD

FredD