Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Ok, I earned an injury report......

Posts

Ok, I earned an injury report......

#1

Ok, I earned an injury report......

Eddie Pacheco; San Jose, Ca.

>For being a wisenheimer on JL's injury report post, I created a bit of bad karma for myself. In a rush to cut a 3 3/4" hole in a 1/2" sheet of plywood, I chucked a hole saw into my 1/2" drill and proceeded to introduce the pilot drill into the wood. Then the hole saw bit....

WHAM! I'm seeing stars, feeling pain on my head, and now a little trickle of something. In the rush, I didn't bother to grab the screw in side handle for my drill. Cuzz, like, it's in another cubby. The milisecond that the hole saw bit the wood, the drill whipped out of my hands, and the tethered chuck key clocked me right smack on the top of the head. I took a time out, put a towel on my head, grabbed and fastened the side handle and finished off the hole. Now I'm off to the showers and calling it a day. Being in a rush (for no good reason, I'm retired, and have been dragging this house job) and not taking a few extra seconds to attach a needed safety device will bite you every time. Here's a picture of the finished hole, culprit, (oh, wait, I'm not in the picture) drill, chuck key, and screw in handle.


img

Re: Ok, I earned an injury report......

#2

Ouch! I Bet You Were Really Torqued!..

George@Colonel's Workshop-Havertown PA

>Good Evening Eddie,

That is my spin on things. Glad it wasn't worse.

George

Re: Ok, I earned an injury report......

#3

1/2" drills are mean and want to kill you

JohnM in Mid Mich

>When I was in college I had a summer job building metal buildings like warehouses, gymnasiums and county road garages. The scene: screwing down the metal roofing. Probably a 4:12 pitch, not bad on asphalt but darned slippery on metal. Panels overlapped with a strip of butyl caulk between the overlaps; two guys, one (me) drills the hole, next guy sets the screw: step, drill, step, drill, etc. Little by little, the caulk accumulates on my drill bit until it starts to sling outwards. Grabs my pantleg, wraps same around bit. This is a hurking big 1/2 inch drill that considers it childs play to pick me up and throw me down, I start sliding down towards the edge, which is 20 feet off the ground. Nothing to grab except the exposed heads of previous screws. Saved by a fingernail. DON'T TRUST THEM. They want to kill us.

Re: Ok, I earned an injury report......

#4

Thanks, Colonel

Eddie Pacheco; San Jose, Ca.

>The bleeding stopped right away and my son said it looks like a round cut. I'm going to take a cue from you and just sit down with a beer and some pretzels to surf the net.

Re: Ok, I earned an injury report......

#5

In the wrong hands that hole hawg is a widow maker

Eddie Pacheco; San Jose, Ca.

>

Re: Ok, I earned an injury report......

#6

Re: In the wrong hands that hole hawg is a widow m

Gary Camp, Bend, oregon

>((Hole Hawg + 4-1/2" hole saw) (Standing over the cord)) / ((the hole saw catching) (a darn big chuck key)) = an old Bill Cosby routine about where not to touchyourself during a football game

glc

Re: Ok, I earned an injury report......

#7

IIRC,

Bruce, a MN Galoot

>"the pain was tremendous"

Bruce, showing his age tonight

Re: Ok, I earned an injury report......

#8

Head On! Apply directly to the foehead!

Clay Foster

>

Re: Ok, I earned an injury report......

#9

Re: IIRC,

Stuart Hough

>" so I started to reach down, and looked into the camera...and then I grabbed my head!!!"

Re: Ok, I earned an injury report......

#10

Eddie, I don't know why they even sell those saws

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>The first thing I do, is take them to the grinder and take off two of every three teeth, and then get rid of the hook of the ones I leave.

This leaves a deeper gullet to handle more chips, and gets rid of the tendency to grab like you just experienced

I don't know why they even sell bits like that. It is just plain stupid. You can't drill over 1/16" before the teeth are full, and that hook angle is just too aggressive.

Re: Ok, I earned an injury report......

#11

Alan Young

I didn't even need to read the text of your post

Alan Young

>to know by the picture that nothing pleasant could have come from that!

My 1/2" Milwaukee right angle drill is a reel fiend. I have had it wrench my wrist more than once.

Alan

Re: Ok, I earned an injury report......

#12

Re: Ok, I earned an injury report......

Howard Norman

>Yes the torque is amazing when that happens. I have never injured myself that way but I understand how it can happen. I have got in the habit of leaving the side handle in my 1/2" Milwaukee all of the time and using it too.

Re: Ok, I earned an injury report......

#13

Had a similar experience with a drill press

Dan Mitchell

>& one of those saws, grabbing the piece I was drilling out of my hand & smacking me with it.

Ouch.

Dan

Re: Ok, I earned an injury report......

#14

Good Thing

Ken Oakley-Sunny St. Cloud, Fla.

>it hit you in the head and not some place you could be seriously be hurt like my finger tip, which has healed nicely.

Re: Ok, I earned an injury report......

#15

Handles are dangerous too!

Lee Schierer - McKean, PA

>Years ago when I was installing my forced air heating system in my existing house. I borrowed a 1/2 Hp drill from my Dad. It was one of those old metal pipe side handle types with a big D handle on top. I was drilling up from the basement through the subfloor and through the wall plates to add cold air returns. I was standing on a short step ladder with the drill and my head up between the floor joists (that thing was heavy so you had to get a good grip and hold it close to tyour body). The drilling was going pretty well, but in one hole I must have hit a nail because quicker than lightning, the bit stopped, the resulting torque and rotation of the drill handle made me give myself a right cross to the jaw which in turn bounced my head off the joist. It knocked me right off the ladder, I heard birds and saw stars for several minutes. Fortunately the drill stuck in the hole and the motor stopped as soon as I released the trigger.

Lee

Re: Ok, I earned an injury report......

#16

JL

I'll expect a detailed email, Eddie :).

JL

>

Re: Ok, I earned an injury report......

#17

Thanks, guys.

Eddie Pacheco; San Jose, Ca.-Now in Pitt. PA------

>A beer and an an Aleve later on in the evening helped. My wife got a bit of a laugh out of it. Sigh, no respect. I'll be back on this rotten project again today. I've been dragging my feet on this simple laundry room redo for about 6 months. The weather has been nice, other more fun projects, and general procrastnation on this job, conspire to stretch it out. Besides, is there anything wrong with having the washing machine in the shop and the gas dryer on the back porch next to the BBQ grill? The clothes are still getting washed and dried. To me the little laundry room would make a great, but tight, sharpening room.

Re: Ok, I earned an injury report......

#18

Forget the sharpening room, or SWMBO.............

Art Silva

>will put another hole in your head. Keep a clear head amigo.

Re: Ok, I earned an injury report......

#19

Re: At least the drill is OK :-)

Brian in Brighton

>