Link Belts
Ken Romines
>I didn't want to kidnap Dean's question on link belts. But can a link belt be run in reverse without problems? (i.e. On a lathe)
Thanks
Ken
Knowledge You Can Build On — Est. 1998
Link Belts
Ken Romines
>I didn't want to kidnap Dean's question on link belts. But can a link belt be run in reverse without problems? (i.e. On a lathe)
Thanks
Ken
Only if you like loud noise
Lee Schierer - McKean, PA
>Running a link belt backwards will result in considerable noise depending upon the speed of operation. They print arrows on the links for direction of travel. I do not know if the belt will hold up running backwards, but they will make a lot of noise.
Lee
Re: Link Belts
Don Evans
>The real question is, why would anyone want too?
Don
Re: Link Belts
Don Evans
>Maybe I can answer my own question, you have a machine that runs forward and reverse?
Why didn't I think of that before asking?
Don
Re: Not only loud ...
Jay St. Peter - Southern, MD
>but additional vibration as well. Sorta the opposite of why you would want to put it on in the first place.
Jay
Re: Link Belts
Jesse Cloud
>Works about as well as a band saw blade installed upside down (don't ask me how I know this.....).
Unlike the Shadow, you have the ability to.......
Art Silva
>CLOUD your own mind!
Re: Not only loud ...
Ken Romines
>Thanks for the info guys. My wife says I'm deaf so I probably would never had heard the noise. But at least you've helped me clear my mind.
Thanks again.
Ken