Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Door Hinge Selection???

Posts

Door Hinge Selection???

#1

Door Hinge Selection???

Thomas Skaggs, Foothills of Mount Level

>So I am building these cool shower doors. There will be a pair of doors with cypress frames. They will swing out 90 degrees. The doors will be mounted in the opening of a walk in shower that has porcelain tile walls. They need to be heavy enough duty to carry the weight of the doors.

I can mortise into the door frames but the other side of the hinges will need to be surface mounted to the tile. I need suggestions for hinges that are made for that sort of installation please?

Thanks

Tom

Re: Door Hinge Selection???

#2

Re: Door Hinge Selection???

Bill Tindall, E.TN

>What about fastening a wood strip to the tile and then using a conventional butt hinge- brass or stainless steel.

Re: Door Hinge Selection???

#3

Re: Door Hinge Selection???

Thomas Skaggs, Foothills of Mount Level

>One problem with that is that I can't lose much width of the opening for the doors. Also I would be concerned that an attached strip of wood would be prone to problems due to water.

Re: Door Hinge Selection???

#4

What I'd do

Ellis Walentine, Host

>You didn't mention whether the hinge knuckle can be visible. If not, you can look into heavy-duty Soss hinges. I don't know if they make rust-resistant models, but I have hung 300-pound, marble-clad doors on big Sossies. If you want to go with SS butt hinges, I suggest marking the locations on the tile and then cut or rout out the tile where the hinges are supposed to go. Pack these hinge "mortises" with shims of whatever thickness works for the door opening. They can be hard rubber or some kind of impervious wood like cocobolo or ipe or lignum vitae. The point is to pack the space between the hinge and the wall framing with something other than tile and grout, which can crack or crumble under the weight of the door and the stress of repeated use.

Another option is to get stainless steel piano hinges, which actually serve the additional function of acting as somewhat of a gasket to keep water from leaking out. Use screws that are long enough to go into the framing if possible.

Ellis