Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

source for full extension drawer slides

Posts

source for full extension drawer slides

#1

source for full extension drawer slides

A Wright

>I am building a cabinet for my workshop, and I need 11 pairs of 28" full extension drawer slides.

Does anyone know of a source for good quality slides at a reasonable price? Most of what I'm seeing is $20+ per drawer for 100 lb full extension slides, and I am trying to figure out if I should just suck it up and spend over $200 on the hardware or if there is a quality alternative that could save me some $$

Thanks in advance for the feedback

Re: source for full extension drawer slides

#2

JL

Re: source for full extension drawer slides *LINK*

JL

>What are you putting in your drawers that require such hefty slides? Do you really need them? Do you really need full extension?

Try Custom Service Hardware. I got some for about $12/pair.


100 # Slides

Re: source for full extension drawer slides

#3

Re: source for full extension drawer slides *LINK*

LRSmith in NC

>You might Woodworkers Hardware. A quick search found found these:


Woodworkers Hardware

Re: source for full extension drawer slides

#4

Re: source for full extension drawer slides

Pete in Holland, MI

>If you were near Holland, MI, there is a commercial office furniture manufacturer here in town with a factory outlet store full of used & obsolete stuff. Just finished an entertainment center using some 20" full extension slides from there. They are originally designed for metal file cabinet drawers, thus pretty beefy. They need about 10 minutes of rework for use in a wood drawer. Cost is $2 per pair.

And.....no, unfortunately, they don't do mail orders.

Pete

Re: source for full extension drawer slides

#5

Re: source for full extension drawer slides

Jim Dillon

>I think when I redid our kitchen, I spent more on quality drawer slides/door hinges than I did on the wood. Well, I exaggerate a bit, but I was surprised at how the cost can build up when doing a lot of drawers/doors. Anyway, I've also have had good luck with Woodworker's Hardware, and Lee Valley. Actually, some of my shop plywood drawers just slide on well-waxed hardwood (locust) runners and they have done just fine for 10 years or so.

Jim

Re: source for full extension drawer slides

#6

Re: source for full extension drawer slides

A Wright

>The cabinet is actually 32" deep (depth dictated by my sliding CMS), so the 28" slides wont be "full extension" once I get them installed (they will be 7/8" extension)

On the weight, three of them need to be heavy duty (two drawers 32x32 for routers and other power tools which will add up quick and another pull-out for my mortiser). The other 8 drawers will be misc tools and those can be lighter duty.

Re: source for full extension drawer slides

#7

Re: source for full extension drawer slides

Fred Davis

>You can get Accuride slides for half of that , ten to a box , very good hardware.

FredD

Re: source for full extension drawer slides

#8

Re: source for full extension drawer slides

chuckbeck in cent il

>I would watch office buildings, bank closings/remodels for what they put in their dumpsters. I worked off 30-ish pairs of ball bearing slides in short and long from a local bank replacing all of their desks and cabinets. It takes luck, patience and a willingness to jump in a construction dumpster.