Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Zinsser's SealCoat - Michael?

Posts

Zinsser's SealCoat - Michael?

#1

Zinsser's SealCoat - Michael?

Mark Mandell - Gone Round In Jersey

>Michael [or anyone else]

Called Zinsser Tech, but no definitive answer to the question of:

"Can I use pure gum turps or SolarLux to retard SealCoat on a horizontal spray application?"

Shop air is so dry right now that solvent flashes too fast to let the film flow out properly. I've used turps (a drop or 2) successfully on my shop-mixed shellacs, but I also have some SolarLux Retarder and Isopropl ("Rub") kickin' round here somewhere.

Thanks

Re: Zinsser's SealCoat - Michael?

#2

Re: Zinsser's SealCoat - Michael?

Well just hurry up....

>If I'm not too far out, I think that the isopropl is the way to go.

Bill

Re: Zinsser's SealCoat - Michael?

#3

Re: Zinsser's SealCoat - Michael?

Bill Tindall, E.TN

>1. The relative humidity has no effect on the evaporation rate of ethanol, if indeed that is what the product is dissolved in. The relative humidity only has an effect on the evaporation rate of water. Temperature, however, has a huge effect, so get things cooler.

2. Rubbing alcohol has a large water component and it will be incompatible. It may seem compatible for a bit but then the shellac will gel if too much water is added.

I don't know about the others, but try it and then you will have a definitive answer. A 1 oz. experiment will answer the questions.