Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Health Problems and Woodworking

Posts

Health Problems and Woodworking

#1

Health Problems and Woodworking

Larry_Wyatt(Cole's Dad)

>I received a nice response about my blog from Galen where he mentioned my 8-year old son's flexibility. He said he wished he still had that kind of flexibility. That got me to thinkin'(which is inherently scary). So here's the question.

Do you have limitations imposed on you by health/aging/flexibility/disability problems and, if so, how do you safely compensate for them in the wood shop? Maybe you use a special jig, or a modified tool or other such device?

Perhaps others with similar problems will be able to learn a thing or two or three from the answers posted. Afterwards, maybe I'll write an article about it for the articles section of WoodCentral.

Larry Wyatt(Cole's Dad)

Re: Health Problems and Woodworking

#2

Re: Health Problems and Woodworking

wilbur

>I've had issues with a stiff right shoulder ever since I threw it out playing baseball when I was younger. A few years back, between the shoulder and doing more work at a computer and using a mouse, I wound up getting physical therapy for it.

I've actually found that using hand tools and woodturning have been good for my shoulder. Using hand planes and the motions used in turning a bowl are pretty good range of motion exercises for me. I'm in a great situation -- I can tell my wife with a straight face, "My shoulder is acting up. I'm going down to the shop." :@)

Re: Health Problems and Woodworking

#3

Aches and pains

Ellis Walentine, Host

>I've had back troubles for a long time, and it has diminished my ability to lift heavy things and to bend over a lathe or workbench for long. Lately I've been taking a Pilates class and that has helped a lot. I think it's never to late to get in (better) shape.

Ellis

Re: Health Problems and Woodworking

#4

Re: Health Problems and Woodworking

George@Colonel's Workshop-Havertown PA

>Hello Larry,

Arthritis has made my hips and hands stiff, so I tend to drop things, and then not be able to bend over to retrieve them. It keeps my mind on what I'm doing. For most small metal items like screws, I rely on a magnet retriever. My eyesight is also diminished, and I am not able to see graduation markings on many items. I can get SWMBO to do a lot of layout work, and with the help of stop blocks and story boards, can generally do a creditable job in fabrication. For close work like gaining hinges, I ask my #3 son to do it.

George

Re: Health Problems and Woodworking

#5

Bad lower back...

John in NM

>From stupidity when I was young and "indestructible". Exercise helps it a lot, shoveling with a long handled shovel is one of the best I've come across, though vigorous hand planing also is a good one - for me at least.

As far as limitations, the biggest is being able to lift lumber. One shop I used to work for stores wood in overhead racks, pulling 8/4 and 12/4 off those was very difficult as its hard to balance heavy boards overhead with a weak back. I store my heavy wood low as most would say is sensible.

Fine work that requires close attention I usually do sitting down now, as the habit of bending close over a bench is very tiring.

I think that boots with good arch support has helped a lot too, but I'm not sure how much that affects the back. I can at least wear them all day and not be dying to get out of them by dinner time.

Re: Health Problems and Woodworking

#6

Re: Aches and pains

Joseph Mulherin, Sr

>Ellis, it has been my experience that when my back starts acting up and I cannot do many things I just go back to the old high school exercises we all learned and strengthen the core body muscles... those muscles all around your stomach and abs, the side muscles, etc.

And also do some leg exercises. I bought one of those machines Chuck Norris advertises, but got it from Wal-Mart for only $170. It is almost exactly the same machine, and doing the exercises that come with it really does give tne body some tone.

Re: Health Problems and Woodworking

#7

Re: Aches and pains

Ken Oakley-Sunny St. Cloud, Fla.

>I had back problems for years in the 60's-70's-and into the 80's, then went to a chiropractor and had him push, pull, twist, and bend my body into impossible positions. After 6 months he told me my spine was realigned and would only need an occasional readjustment. That was 25 years ago and I haven't had single problem with my back. I do run into pains in the area just below my spine occasionally but just tell them to bug off.

Re: Health Problems and Woodworking

#8

Hearing protection

Pat Evans

>Knock on wood, at the moment I don't have hearing problems but my dad does. Wood working may or may not have been the cause, but it couldn't have helped. I've learned from his mistakes and I ALWAYS use hearing protection, even when doing the mundane such as using my shop vac. It is one of the noiesiest operations in my shop. God willing, I'll be able to avoid the problems caused by deafness.

Re: Health Problems and Woodworking

#9

Re: Aches and pains

Fred Davis

>Ellis

I have had lower back pain and Spinal Arthritis for years .

Any thing that requires a slight bent over position like sanding or bench work kills me.

After having a lateral reconstruction of both ankles and knee replacement that pretty much did away with brisk walking for exercise.

Then..... I read a medical doctors report on dosing himself with 250 MG of Magnesium a day for back pain and I tried it .

I let me self run out for two days last week and I realized quickly how much it had been helping.

Since this is anecdotal , use your own judgement, But I think nearly everyone who has used their back in manual labor for years has about the same problem to a greater or lessor degree.

FredD

Re: Health Problems and Woodworking

#10

Coumadin

Brent Smith, Montreal

>I take Coumadin (an anti-coagulant) due to an aortic valve replacement I had several years ago. Given the amount I take to reach the degree necessary to prevent clotting at the valve, it basically makes me a chemically induced hemophiliac. It has also caused me to become much more aware of anything I do around tools. Because of the definite reality of severe life threatening bleeding, I double and triple check any new technique, powered or hand tool. What I've found is that this often leads me to much safer practices. Power saws are an obvious threat, and I think we all pay attention to what we're doing with them. What's not so obvious is how we handle rough lumber, how we hold a chisel for just that one little shaving or even how we change a TS blade or a band saw blade. I've been forced to develop different ways of doing some things. Although I certainly don't recommend it, it is one of the surest ways of paying complete attention to what you're doing in the shop.

Re: Health Problems and Woodworking

#11

Re: Coumadin

Ray Thompson

>Have had 3 back operations, each one making my back a little worse.

Finally got smart enough to quit having operations.

Nothing helps the pain.

When it gets bad I have a stool in my shop that I sit on, look out the window and think of all the lifting I did 40 years ago.

Ray in WNC

Re: Health Problems and Woodworking

#12

visual acuity

Bill Tindall, E.TN

>I have the usual inability to focus at any distance that occurs as our eyes age. I upped the lighting in the shop to 200 ft cd at the bench and that helped a lot. The less the pupils are dilated the greater the distance over which one's glasses will focus the image on the eye.

Second, for detailed work I had made a pair of glasses that focused at the distance I typically worked at when doing detailed work. I find these glasses particularly handy doing lathe turning and dovetail sawing. If you use a pair of old frames these single vision glasses won't cost much.

Re: Health Problems and Woodworking

#13

Re: Health Problems and Woodworking

Larry Marker in Alabama

>I have emphysema, so I am fanatical about sawdust. I have a cental DC which I use religiously and an overhead air cleaner. I don't generally wear a mask when sawing or such, but I do when I sand.

For sanding, I have a 20" box fan with an AC filter taped to it that I sit on the end of the bench to suck loose dust before it can disperse in the air. I hook an old shop vac to the sander and a hose from the sander's exhaust port to the central DC. I get virtually no dust in the air from sanding.

I also have cataracts, so I put in lots of fluorescent lamps overhead plus I have a task light on the bench and I use one of those magnifiers on an arm with the circleline fluorescent lamp around it for close measurements, etc.

Larry

Re: Health Problems and Woodworking

#14

Re: Health Problems and Woodworking

Fred Davis

>

Re: Health Problems and Woodworking

#15

Re: Health Problems and Woodworking

Fred Davis

>wrong button again.

If you don't wear leather gloves, for the obvious reasons in the shop you should.

I took Coumadin for six weeks to prevent bloot clots after knee replacement surgery and I did.

hated the feel , but no nicks.

FredD

Re: Health Problems and Woodworking

#16

Re: Health Problems and Woodworking

bill Crommett

>Pay attention: Wilbur has learned the art of turning a lemon into lemonaide.

Re: Health Problems and Woodworking

#17

Re: Health Problems and Woodworking

Robert R. Clough - Thorncraft

>Well, first of all, I have limited use of my right arm and shoulder due to spinal spur problems (C5 in the neck). Then I have asthma and emphysema and getting over pneumonia and I'm on oxygen much of the time. I use (now) an Airshield Pro helmet and also have other dust collection units in the shop. (I have < 45% use of my lungs). My eyes are no longer really good due to cataract and glaucoma. However, with care I can and do work in the shop and enjoy it. As with the rest of you I refuse to stop. Yes handtools do help keep the arm and shoulder somewhat limber. (but oh how I now despise winter here in SE WI)

Re: Health Problems and Woodworking

#18

Re: Coumadin

Alexander Grigoriev

>Brent,

Wearing those $10 CLC Handyman gloves from BORG greatly reduces all those little cuts and scratches, while not affecting dexterity and feel too much.

Re: Health Problems and Woodworking

#19

Re: Coumadin

Brent Smith, Montreal

>Hi Alexander,

I wear gloves very similar to those, and they do work well when handling rough lumber. I also wear a Duluth Trading shop coat to protect against bruising on the arms and torso when moving around heavier or awkward pieces.