Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

splines

Posts

splines

#1

splines

Bruce, a MN Galoot

>I got myself roped into repairing a table for a friend. The legs of the table have pulled away from the pedestal. They are fastened with 1/2" dowels about 4" apart, and the center column is about 4" in dia.

I've planned to replace the dowels with a spline or maybe more properly a floating tenon that will span the original dowel holes. It will be set into both the column and legs an inch.

My question is what is better material for the tenon/spline itself: a hardwood such as oak or baltic birch plywood?

Appreciate the recommendations.

Bruce, in suddenly cold MN (got a little warm spell for the last few days, nearly hit +30F)

Re: splines

#2

Dale Lenz

Re: splines

Dale Lenz

>Since you are talking of a blind spline(?), correct? I'd use the plywood, easier.