Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Looking to purchse doors/drawers

Posts

Looking to purchse doors/drawers

#1

Looking to purchse doors/drawers

ncguy77

>So I'm deep into a home refurb in multiple rooms and i'm too overloaded to make a bunch of drawers and doors that I need for some built-ins that I am making throughout house.

I refurbed my kitchen lowers recently and got some great 5/8" drawers from udb.cc however the shipping is killing me (adds 50%).

I need probably 15+ drawers for the rest of projects. Anybody have some links to a quality source that is closer to raleigh,NC?

Also I made some wide shallow drawers that need paint grade flat-panel rail/stile false fronts(ideally like poplar rail +mdf panel). However I cant find a place that will make it with the narrow 5.875" dimension that I have. Anybody have links for some good drawer front sources. I just need a simple 1/4" bead on the inset panel.

Re: Looking to purchse doors/drawers

#2

look local

Bill Tindall, E.TN

>a local cabinet shop is a source. Find one with low overhead and they can make them cheaper than you are getting them

Re: Looking to purchse doors/drawers

#3

Commercial drawer parts

Ellis Walentine, Host

>This is a large and highly automated business, with tons of companies that make anything you want to order. I'd check online sources such as Wood Digest for commercial woodworking components. Here's a link for doors and drawer fronts: http://www.woodcentric.com/product.aspx?parId=4&catId=1178 and here's another for drawer components: http://www.woodcentric.com/product.aspx?parId=4&catId=1181. I'm sure most of these guys would rather deal with larger orders, but in this slow economic period, you might find them more tractable.

Ellis Walentine, Host

Re: Looking to purchse doors/drawers

#4

Gibsonville

Richard Jones

>http://www.hardwoodstore.com/

I've never dealt with the drawer box/door side of this business, but I have bought a bit of lumber from them and they are nice folks. I usually talk to Jeff.

Rich

Re: Looking to purchse doors/drawers

#5

Re: Looking to purchase doors/drawers

Barry Irby

>I have a friend in the cabinet business. He used to make all his own doors and drawers etc, but found out he can order them cheaper and easier than he can make them. As I understand it, he can get a wide variety of styles in a wide variety of woods and they make the doors and drawer fronts to his exact dimensions. (Or perhaps they make them in very small increments and he picks what suits him best) They make them for him one kitchen at a time. He may still make his own drawers, I'm not sure. If he gets drawers from them they come knocked down and he assembles them. We are in Central VA, but I don't know where the stuff comes from. If you are interested, I could ask, and get you a name.

Re: Looking to purchse doors/drawers

#6

Re: Gibsonville

ncguy77

>Thanks, this was a good lead.

The pricing on drawer fronts look promising. And I can pick up for zero shipping.

The drawers also looked reasonable but they only have 1/4" bottoms. I hate saggy drawer bottoms and gotta have 3/8" or better

Re: Looking to purchse doors/drawers

#7

Re: Looking to purchase doors/drawers

ncguy77

>To avoid wasting his time tell him to look at udb.cc website and see if he can match/beat that delivered to raleigh. If so have him respond here.

I did the following example at udb.cc online calculator

Dovetailed

fully assembled

pre-finished clear

5/8" sides/front/back

12 ply euro birch

bullnose

no edge band

3/8" bottom euro birch ply

blum tandem notch

6"x23Wx21D

$44

These drawers were really solid and impeccably finished.

As for the drawer front example

solid paint grade wood frame (poplar probably) no finger jointed stuff

MDF flat panel (ideally it would have a thicker panel that made it flush to back of rails/stiles but I have never seen anybody advertise that)

1/4" bead at rail/stile and panel connection

simple roundover on all 4 outside front edges

6x32= <$20

Need at least a dozen of each

Re: Looking to purchse doors/drawers

#8

Re: Looking to purchase doors/drawers

ncguy77

>I realized that i have a bogus email address showing above. He can reach me at 22tater22cat@bellsouth.net (remove the 2's from that address to make it valid)

Re: Looking to purchse doors/drawers

#9

Re: Looking to purchse doors/drawers *LINK*

Kaleb Jones

>Try looking on craigslist locally. This way you could meet them and see if its what you wanted in person before you sent any hard earned money.


Find Wooden Dowels