Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Festool Plunge Cut Saw question

Posts

Festool Plunge Cut Saw question

#1

Festool Plunge Cut Saw question

A Wright

>I am looking at buying a Festool plunge cut saw, and had a couple of questions about accessories. It looks like I need to buy the following

1) the saw (55 will work for me since its primary use will be on sheet goods too large for my tablesaw)

2) 42" guide (to be combined with the 55" guide to rip plywood)

3) pair of clamps

4) pair of guide connectors

Am I missing any accessories here that are "important"?

Also, does anyone have feedback on the new Dewalt track saw? It looks roughly equivalent to the Festool, andWoodworker supply has a special that would get the full kit with an extra section of track for $499 (about $125 cheaper than Festool) I've always had good luck with Dewalt, but hadnt seen any reviews on this product

Re: Festool Plunge Cut Saw question

#2

Re: Festool Plunge Cut Saw question *LINK*

mark nowicki

>There is a comparison of Festool and DeWalt here:

http://festoolownersgroup.com/index.php?PHPSESSID=97ca449a4cb19ec13a925ecf92cf5608&topic=5400.0

(you might have to register to see the pictures}

I have the Festool 55 and I don't think that the 55"/42" guide combination would allow you to rip a sheet of standard plywood. The guide needs to overhang the edge by a few inches to support the saw. I have the 55"/55" combo.

I would add the thirty something guide rail to your purchase list. Combine it with the 55" guide to rip 5'X 5' ply, and use it alone when cross- cutting.

Mark


Festool and Dewalt comparison

Re: Festool Plunge Cut Saw question

#3

Very helpful

A Wright

>The head to head comparison was very useful. It sounds like both saws are very high quality and the differences are relatively minor

One thing I like about the Dewalt is that they have a router guide that is designed to specifically fit Porter Cable routers (which I already own 3 of). Is there an option for a "universal" router attachment for the Festool tracks or do you need to buy a Festool router?

Re: Festool Plunge Cut Saw question

#4

Re: Very helpful

Jesse Cloud

>I think both saws are quality products.

The difference in Festool, though,is their systematic approach. All their tools use the same power cords, same vac connectors, guide rails, etc. I have one power cord and one vac hose on my worktable and switching between the saw and the sander or router is a snap - and no tangled cords.

So, if you are thinking about getting other Festools in the future, the TS55 makes sense, otherwise its a coin toss.

BTW, I don't think Festool has a universal router adapter for the rail, but its not hard to make one in the shop.

Re: Festool Plunge Cut Saw question

#5

Re: Festool Plunge Cut Saw question

Steve in Denver

>Festool will soon be offering a set of guide rail attachments for repeatable rips, 2nd video from the top.

http://woodworkersjournal.com/ibs/tuesday.cfm

Not really saw accesories, but next you'll be "needing" their vacuum, MFT, router, sanders, etc.

Re: Festool Plunge Cut Saw question

#6

Re: Festool Plunge Cut Saw question

Jay St. Peter - Southern, MD

>As mentioned you need at least another 55" rail to cut plywood. That's the combination I have and wouldn't get again. I'd get a longer second rail. MDF is a little oversized and you cannot use the hose/cord guide on the end of the guide rail and have it long enough to make the full cut. What I really want to do is get a 106" (3000?) rail so I don't have to make/unmake connections. But, I'd recommend at least the next step up from the 55" as a second rail. I have found that a great use of the saw is to rip down rough lumber for processing. With 9-10' long boards, the two 55's don't cut it there either. You'll also need a blade with fewer teeth to do this. I have the universal blade and like it, but others seem to like the panther ripping blade.

There are some aftermarket adapters to use other routers with the Festool rails. Microfence makes one and I think there is another. I know there are a number of people on the Festool Owners Group that use other router brands, so support is there to help you make it happen.

The Dewalt looks interesting, but I know nothing about it other than the review already posted. FWIW, I highly recommend the Festool saw.

Jay

Jay

Re: Festool Plunge Cut Saw question

#7

Re: Festool Plunge Cut Saw question

Steve in Denver

>You might check out the new line of blades from Tenryu. They all have the same kerf width. The Festool blades having varying widths which will mean you'll need to reinstall the rubber strip on the bottom of the guide rail frequently.