Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Replacement wheels for a WC Horz Wet Grinder?

Posts

Replacement wheels for a WC Horz Wet Grinder?

#1

Replacement wheels for a WC Horz Wet Grinder?

Dominic in Buck's County PA

>Hi gang,

About a week back I found out that Woodcraft was closing out their Horizontal Wet Grinder and selling it for $60. For that price I figured that at minimum I could easily use it as a power strop (replace the grinding wheel with an MDF disk and charge it with Veritas Green Honing Compound) if it didn't work well as a grinder.

Last night I finally got a chance to try it out for real by flattening the the backs of (8) chisels. The unit operated a lot quieter than I had thought. I was able to work in the basement without bothering anyone upstairs! And I was pleasantly surprised at how polished the end product was. One more thing, the foot pedal Woodcraft sells works PERFECTLY with this item!

However, it took a while to lap the back of these chisels! I would prefer a speedier method (as long as it doesn't impact the end goal of lapping a nice flat surface). I figured that a coarser wheel would do the trick.

The 7" grinding wheel that is included is 1000x (at least that's what they call it). I was wondering if I could buy coarser replacement wheels. Or does someone know if the wheels from another brand of wet grinder will fit this one. The Woodcraft site if barren of such information (probably because this is a clearance item).

Another woodworker directed me to Japan Woodworker where they sell an almost identical wet grinder. But their replacement wheels are almost $40 each.

Before I go and drop $40 on a replacement wheel (that may or may not fit), I'd like to know if anyone knows of another place to purchase these grinder wheels. I will also try to call Woodcraft and see if I can talk to a live person. Sometimes they still carry the old stock from close outs in their stores but don't offer it on the Web.

See ya around,

Dominic

Re: Replacement wheels for a WC Horz Wet Grinder?

#2

Re: Replacement wheels for a WC Horz Wet Grinder?

Bill Tindall, E.TN

>Can't help you specifically, but we have flattened chisel backs on a Makita horz. grinder and it is the fasted way we have discovered. Maybe the Makita wheels fit? Also, check places like MSC to see if there is some tool room wheel that will fit. $40 for a quality wheel is not an excessive price. .if it works

Re: Replacement wheels for a WC Horz Wet Grinder?

#3

Dominic in Bucks County PA

Thanks Bill

Dominic in Bucks County PA

>Bill,

Thanks for the tip!

I looked around on the internet and was surprised to find that similar wheels sold for as much as $65. So that 440 isn't sounding so bad right now.

Dominic